BILLYPIV Posted September 3, 2013 Report Share Posted September 3, 2013 What's supposed to be attached here?http://i227.photobucket.com/albums/dd32/watatap7/110DF81A-7DCD-42F2-A651-14E52E497DCE-15615-0000184B1D870253_zpsb666893e.jpg Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted September 3, 2013 Report Share Posted September 3, 2013 the 12V power wire from the stock harness Link to comment Share on other sites More sharing options...
aknorthstar Posted September 3, 2013 Report Share Posted September 3, 2013 Two wires on positive are, black with white stripe, which is Ignition positive and the wire from the radio filter .http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-46.jpg Link to comment Share on other sites More sharing options...
BILLYPIV Posted September 3, 2013 Author Report Share Posted September 3, 2013 Cool thankyou!!! Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted September 3, 2013 Report Share Posted September 3, 2013 Two wires on positive are, black with white stripe, which is Ignition positive and the wire from the radio filter .http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-46.jpgthere should only be one wire on the positive side Link to comment Share on other sites More sharing options...
aknorthstar Posted September 3, 2013 Report Share Posted September 3, 2013 (edited) http://i35.photobucket.com/albums/d182/Professor-Quest123/Dist/DR-20.jpg Edited September 3, 2013 by aknorthstar Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted September 3, 2013 Report Share Posted September 3, 2013 that shows the filter and cap going to the negative side Link to comment Share on other sites More sharing options...
ucw458 Posted September 3, 2013 Report Share Posted September 3, 2013 that shows the filter and cap going to the negative side It goes on the positive side. Link to comment Share on other sites More sharing options...
aknorthstar Posted September 3, 2013 Report Share Posted September 3, 2013 that shows the wire going to the capacitor, the filter wire is routed to the other side, kinda hard to tell from those awesome FSM pics. Link to comment Share on other sites More sharing options...
88-cnqst-tsi Posted September 3, 2013 Report Share Posted September 3, 2013 It goes on the positive side.that shows the wire going to the capacitor, the filter wire is routed to the other side, kinda hard to tell from those awesome FSM pics. sorry for my miss understanding, and I have been told by other members that there should be just the power wire going to the positive but hey I guess we all don't know everything, and does it hurt to have the filter and cap on the negative side Link to comment Share on other sites More sharing options...
aknorthstar Posted September 3, 2013 Report Share Posted September 3, 2013 (edited) http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-43.jpg http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-44.jpg Edited September 3, 2013 by aknorthstar Link to comment Share on other sites More sharing options...
ucw458 Posted September 3, 2013 Report Share Posted September 3, 2013 Actually the noise filter is supposed to be attatched to the intake. The OEM location is one of the EGR bolts. http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-43.jpg http://i17.photobucket.com/albums/b71/questmanual/pro-cu/CU-44.jpg Link to comment Share on other sites More sharing options...
Shelby Posted September 4, 2013 Report Share Posted September 4, 2013 that coil in the pic is not off of any conquest ,, Link to comment Share on other sites More sharing options...
psu_Crash Posted September 4, 2013 Report Share Posted September 4, 2013 Filter caps are always in parallel with the load, whether it's a coil, amplifier, motor .. etc. Meaning it connects to the positive side and the other end goes to ground in this case. Link to comment Share on other sites More sharing options...
Recommended Posts