2fast2six Posted April 29, 2013 Report Share Posted April 29, 2013 MY IN LINE FUEL FILTER THAT MOUNTS BETWEEN THE FUEL PUMP AND FUEL TANK NIPPLE IS BAD. LOOKING FOR A PART NUMBER FROM AN AUTO PART STORE FOR A FUEL FILTER. CANT FIND ONE ANYWHERE. IT SAYS ON THE FORUM TO GET ONE THAT HAS 12MM FITTINGS BUT IM HAVING NO LUCK. A SO CALLED IN-OUT FILTER. ATTACHED IS A PICTURE.. ITS THE ONE TO THE RIGHT OF THE FUEL PUMP! Link to comment Share on other sites More sharing options...
BuGG Posted April 29, 2013 Report Share Posted April 29, 2013 (edited) Wix #33278 Its gonna be hard to find now. Check second post on this site for cross reference numbers. http://fluforum.italiancarclub.com/viewtopic.php?p=20863 Edited April 29, 2013 by BuGG Link to comment Share on other sites More sharing options...
2fast2six Posted April 29, 2013 Author Report Share Posted April 29, 2013 THAT WIX NUMBER IS NOT GOOD ANYMORE Link to comment Share on other sites More sharing options...
2fast2six Posted April 29, 2013 Author Report Share Posted April 29, 2013 CAN I USE A 10 MICRON 1-2 GPH FILTER? Link to comment Share on other sites More sharing options...
2fast2six Posted May 1, 2013 Author Report Share Posted May 1, 2013 so anybody know how many micron filter i need to use before my fuel pump and how many gph it needs to be???? Link to comment Share on other sites More sharing options...
BuGG Posted May 1, 2013 Report Share Posted May 1, 2013 Did you spend more than 2 min on this? http://www.apdty.com/item.wws?sku=GF792&itempk=124782&mfr=ACDELCO%20US&weight=1 https://acdelcooutlet.com/index.php/other-parts/gf792.html http://www.discountautoparts.com/item.wws?sku=043-0852&itempk=710373&mfr=BECK/ARNLEY&weight=1 http://www.discountautoparts.com/item.wws?sku=G2951&itempk=418864&mfr=CHAMPION%20LABORATORIES%20INC.&weight=1 Inlet size is .48 Outlet size is .48 Link to comment Share on other sites More sharing options...
Shelby Posted May 2, 2013 Report Share Posted May 2, 2013 did you pay attention to the 1-2 gal per hour ,, way to low for a fuel inj system Link to comment Share on other sites More sharing options...
Caliber308 Posted May 4, 2013 Report Share Posted May 4, 2013 (edited) Beck/Arnley part no. 043-0852 will fit. Bill Edited May 4, 2013 by Caliber308 Link to comment Share on other sites More sharing options...
C300 Posted June 11, 2013 Report Share Posted June 11, 2013 check out the pic in my gallery. F3 clear Fram at walmart or autozone. remove cone filter. the one in the pic is discolored from rust in it. works great and see through ! Link to comment Share on other sites More sharing options...
Recommended Posts