THI Posted January 18, 2013 Report Share Posted January 18, 2013 (edited) http://img14.imageshack.us/img14/9411/moldingy.jpg Does anyone know if the moldings, shown with arrow, is factory or aftermarket and if they can be easily removed. Thanks Edited January 18, 2013 by THI Link to comment Share on other sites More sharing options...
tankbob Posted January 18, 2013 Report Share Posted January 18, 2013 Probably aftermarket, makes sense to put it there because thats where we get door dings. Link to comment Share on other sites More sharing options...
TexasQuest Posted January 18, 2013 Report Share Posted January 18, 2013 I've seen alot with this modling trim. I'm starting to wonder if it was a dealer add on? Link to comment Share on other sites More sharing options...
patra_is_here Posted January 18, 2013 Report Share Posted January 18, 2013 they suck! I have seen different types of mouldings (not just the style posted) .my 86 had different ones than my 83. and, btw, the are mounted with rivets and the holes are inaccessible from the back side (they are located inside of the door brace). so if you fill them, I hope you are a skilled welder and I hope you figure a way to keep moisture away from the backside of the welds. Link to comment Share on other sites More sharing options...
DMNDSTAR87 Posted January 19, 2013 Report Share Posted January 19, 2013 THEY WERE ON MY CAR WHEN I BOUGHT IT IN 1992----THEY HAD ONES THAT WERE PLASTIC AND THEY STUCK ON WITH DOUBLESIDED TAPE AND THEN THE OTHERS WERE AN ALUMINUM RAIL WITH A PLASTIC MLDG INSERT AND WERE RIVITED ON.THAT WAS A POPULAR DEALER ADDON BACK IN THE DAY---GIG OUT Link to comment Share on other sites More sharing options...
Burton Posted January 20, 2013 Report Share Posted January 20, 2013 most I have found were just the stuck on style... If it's that kind it will come offwithout any holes to fix Link to comment Share on other sites More sharing options...
Recommended Posts