Hit_N_Run-player Posted August 7, 2010 Report Share Posted August 7, 2010 (edited) Hey guys im parting out my car, im really done with the G54 and im not spending the money to replace wisecos because for some reason one is melted to my #4 cylinder. Pretty sure it was because of a bad runner design on the caravan intake manifold along with a decent flowing turbo and setup. Made a lot of power, but kept blowing the headgasket on #4 and now im parting the car out after seeing the melted piston. Please don't say any negative remarks guys, this is my decision. Im going to start off by listing all the parts, if there is anything you would like to purchase you'll have to get in touch with me as im listing them. What you see if for sale.Starting off parts i know are good and will be selling, many engine parts such as the marnel head will be sold once i confirm they are in proper condition. Thanks!! evo3 big16 turbo- True EVOIII turbo with td05H turbine wheel, and 48.3mm compressor wheel. Also has a larger compressor housing for more flow, and the turbine housing has been setup to run an external wastegate only. If you want internal you'll need to buy a new td05H turbine housing. Sold as a package with downpipe (2.5" 439ss with flex pipe and v-band), external wastegate adapter (to tial 38mm flange), and screamer pipe for tial 38mm (1.5-2.0"). Wastegate sold seperately but you could by a knockoff if you wanted to.. 50 miles on this turbo, boosted only twice at 13psi- brand new center cartridge from forced performance. Make me an offer-- http://img.photobucket.com/albums/v105/cornelius540/0616001913.jpghttp://img.photobucket.com/albums/v105/cornelius540/0615001904a.jpghttp://img.photobucket.com/albums/v105/cornelius540/0615001936.jpghttp://img.photobucket.com/albums/v105/cornelius540/0615001904.jpghttp://img.photobucket.com/albums/v105/cornelius540/0614002023.jpg Next to a starion big16G http://img.photobucket.com/albums/v105/cornelius540/0605001032.jpg Also have a one piece mandrel bend 2.5" intercooler pipe to the factory intercooler. Not sure which options you would have for fitment but i was using a stock starion intercooler then welded the other side to run the intercooler pipes like so vvvv asking $100 obo for the intercooler pipehttp://img.photobucket.com/albums/v105/cornelius540/0612001150.jpghttp://img.photobucket.com/albums/v105/cornelius540/0613001804.jpghttp://img.photobucket.com/albums/v105/cornelius540/0616001913.jpg Selling a 3" GM MAFS-- $35 shippedhttp://img.photobucket.com/albums/v105/cornelius540/100_0274.jpg http://img.photobucket.com/albums/v105/cornelius540/DSCF0032-1.jpg http://img.photobucket.com/albums/v105/cornelius540/0615001904.jpg http://img.photobucket.com/albums/v105/cornelius540/DSCF0040.jpg http://img.photobucket.com/albums/v105/cornelius540/DSCF0039.jpg http://img.photobucket.com/albums/v105/cornelius540/DSCF0036.jpg http://img.photobucket.com/albums/v105/cornelius540/DSCF0034.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0027.jpg 1 green top secondary injectors- both work well and were cleaned on an injector cleaner and made sure they didnt leak-- $45 Stock distributer with almost brand new vacuum advance (with boost retard)- $60 Stock radiator I had cleaned and core checked. Nice condition.- $40 local pickup only Many many more parts to come—have ECU, transmission, clutch/flywheel, 2 drive shafts, battery relocation kit, rx7 100amp alternator with custom bracket to fit (stock wiring plugs in), etc… Let me know what you want if its not listed and ill see what I have. Contact me at cornelius540@yahoo.com, or call me at 971-678-8322 (Portland OR). IF I don’t answer leave a message im either working or busy! Thanks guys! Edited August 27, 2010 by Hit_N_Run-player Quote Link to comment Share on other sites More sharing options...
marso Posted August 7, 2010 Report Share Posted August 7, 2010 PM sent. Quote Link to comment Share on other sites More sharing options...
toofast Posted August 7, 2010 Report Share Posted August 7, 2010 Pm sent for translator Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 7, 2010 Author Report Share Posted August 7, 2010 (edited) replied to PM's! thanks and more pics.. http://img.photobucket.com/albums/v105/cornelius540/DSCF0014-Copy2.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0015-Copy.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0012.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0011.jpghttp://img.photobucket.com/albums/v105/cornelius540/00000.jpghttp://img.photobucket.com/albums/v105/cornelius540/000000000-Copy2.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0025.jpghttp://img.photobucket.com/albums/v105/cornelius540/0614002026-Copy.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0020.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0018.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSCF0016.jpghttp://img.photobucket.com/albums/v105/cornelius540/DSC10-Copy.jpg Edited August 28, 2010 by Hit_N_Run-player Quote Link to comment Share on other sites More sharing options...
OPTIMUSPRIME Posted August 9, 2010 Report Share Posted August 9, 2010 (edited) pmand injectors.... Edited August 9, 2010 by OPTIMUSPRIME Quote Link to comment Share on other sites More sharing options...
OPTIMUSPRIME Posted August 9, 2010 Report Share Posted August 9, 2010 This is like a candy store! Quote Link to comment Share on other sites More sharing options...
creakyjoints Posted August 9, 2010 Report Share Posted August 9, 2010 How much for thermostat housing and water hoses? Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted August 10, 2010 Report Share Posted August 10, 2010 do you have a non jet valve head. Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 10, 2010 Author Report Share Posted August 10, 2010 How much for thermostat housing and water hoses? 35 shipped, with both lines and fittings needed to go into turbo and thermostat housing Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 10, 2010 Author Report Share Posted August 10, 2010 do you have a non jet valve head. Yes its a marnel head, with stelite hardned exhaust valves, shneider springs set at 110lbs seated, and a stock cam. Im going to take the head into the machine shop before i sell it to make sure surface is good and everything checks out. I dont want to sell something and then have to find out it was a bad product. Quote Link to comment Share on other sites More sharing options...
Coke Posted August 10, 2010 Report Share Posted August 10, 2010 (edited) How did you get the throttle body to face 180* reverse? I am interested in that setup. How much for that? Edited August 10, 2010 by Coke Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted August 10, 2010 Report Share Posted August 10, 2010 how much for the head? Quote Link to comment Share on other sites More sharing options...
AlexNYC Posted August 10, 2010 Report Share Posted August 10, 2010 fuel lines, regulator and gauge? $$$? Quote Link to comment Share on other sites More sharing options...
Jnm Posted August 10, 2010 Report Share Posted August 10, 2010 I'll take the distributor How much with shipping to 18049, east pa Lmk paypal info Joe Quote Link to comment Share on other sites More sharing options...
dem0ntsi Posted August 11, 2010 Report Share Posted August 11, 2010 Ill take the valve cover and fog lights if you still have them, send me a PM with the price. Quote Link to comment Share on other sites More sharing options...
Komeuppance Posted August 11, 2010 Report Share Posted August 11, 2010 Hmmmmmmmmmmmmmmmmmm... -Robert Quote Link to comment Share on other sites More sharing options...
Psykore Posted August 11, 2010 Report Share Posted August 11, 2010 How much for thermostat housing and water hoses? 35 shipped, with both lines and fittings needed to go into turbo and thermostat housing I'll take it if creakyjoints doesn't. Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 11, 2010 Author Report Share Posted August 11, 2010 How did you get the throttle body to face 180* reverse? I am interested in that setup. How much for that? Caravan intake with throttle body adapter plate. I wouldnt really recommend using it unless you were going to go MPI with it or add aditional injectors. how much for the head? Not sure yet, need to check it out at the machine shop first to make sure everything is still good. fuel lines, regulator and gauge? $$$? Setup has a sale pending, need to check my PMs and paypal stillI'll take the distributor How much with shipping to 18049, east pa Lmk paypal info Joe PM sent Ill send you a PMIll take the valve cover and fog lights if you still have them, send me a PM with the price. ok, will do Quote Link to comment Share on other sites More sharing options...
Coke Posted August 11, 2010 Report Share Posted August 11, 2010 Caravan intake with throttle body adapter plate. I wouldnt really recommend using it unless you were going to go MPI with it or add aditional injectors. Why not recommend it? I've run a Caravan intake before, in the past. Car ran pretty well with it. But the bolt pattern on the adaptor plate on my intake, is for the "correct"facing TB. It was welded on, I do believe. Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 12, 2010 Author Report Share Posted August 12, 2010 im just saying this because i havent seen a flow test on a caravan intake and would like to see the amount of fuel and how equal to each cyl it is. I liked it, but with the problems i kept having with headgaskets im not going to recommend a product im not 100% true and test with. I dont want to say buy it and then have someone start running into some headgasket issue. if anyone thinks they want it then id say give it a shot. Quote Link to comment Share on other sites More sharing options...
Hit_N_Run-player Posted August 12, 2010 Author Report Share Posted August 12, 2010 if i havent got back to you on something i should have message me again and let me know, my inbox has tons of messages and im overloaded with emails, but im trying to get back to everyone in a timely manor. parts are also first come first serve, so if you want something and have the money just say something. Thanks! Quote Link to comment Share on other sites More sharing options...
Psykore Posted August 12, 2010 Report Share Posted August 12, 2010 I'm still interested in the thermostat housing if you have it; send me payment infos. Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted August 12, 2010 Report Share Posted August 12, 2010 have you gotten that head checked. Quote Link to comment Share on other sites More sharing options...
tsiswat Posted August 12, 2010 Report Share Posted August 12, 2010 Any chance you can give a rundown of what is still available? Awesome stuff btw! Quote Link to comment Share on other sites More sharing options...
C300 Posted August 13, 2010 Report Share Posted August 13, 2010 Hi, if your selling the front air dam pm me with how much. Can drive down from Seattle N get it. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.