Does anyone know if the 3 pieces of trim that go around the front windsheild can still be bought new from the dealer if they can does anybode know the part numbers? i was also wondering about the hood insulator not the aluminum part the piece under neith.

Who on here is using one of tim's monsta bansee cam's with or without a mpi setup. what kind of results have you yielded from it with supporting mods?

http://i.imgur.com/jnVxWAo.jpg   This is an OEM hard line that I cut and flared, then replaced the old rubber section with -6 AN Fragola Series 6000 braided stainless hose, which is teflon-lined and rated for hot ATF at 2,500psi. I test fitted the line and and the length is correct. If you have any problems, I'll offer a full refund. You'll need to add a -6 AN fitting like this one to your power steering pump with a crush washer in order to connect it to this line.   Price: $40 shipped. That's p

Well today I got my car back on the dyno. First dyno run was a few months ago. Put down 212 hp and 290 ft/lbs.   I installed a 3" MK1 exhaust and downpipe yesterday and decided to see what my numbers are now.   As of today 245 hp and 322 ft/lbs. Went from a TEP 2.5" downpipe and straight pipe.   So in all I would say once again that dyno numbers prove a 3" exhaust will make more power than a 2.5" system on our cars.