Jump to content

    IAC / Stepper Motor

    kev_rm
    By kev_rm,
    What are folks using for idle control?   Solenoid? Stepper? And with which throttle body, or is it plugged into your manifold elsewhere?

    Headlight fix for archiving

    Tim_C.
    By Tim_C.,
    I like to save known fixes on my own harddrive, so here's one for anyone who does the same.   The left low beam headlight went out on my '85. I first checked the fuses, and that wasn't it. So I started switching from low beam to high beam, and checking what was happening out at the plug for the headlight. It seemed the ground signal was not switching on the low beam side only. I then thought it may be the dimmer switch, but then realized that would make the right side not work also. So, I wen

    Aftermarket lights

    vbrad511
    By vbrad511,
    Anybody ever use "Eurodezign" headlight bulbs? I tried them a few years ago and liked them. My first set were labelled 5200K, my second set, 6000K, but now they're selling 8500K. My concern is that they may draw too much load and toast the wiring. BTW, these aren't in my Quest, they're in my '97 Ranger. Any thoughts? Thanks

    rear lights

    turboquestDMC
    By turboquestDMC,
    I need to get the rear light cover off, to replace the right reverse bulb to pass inspection. Help.

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...