So this has been an issue since I bought this car a few month back, but it seems to be even worse with the cold weather. My starion (87) runs horrible on cold start up. It's not really drivable at all, and has a very difficult time revving at all. The narrow band (I know, lame, but that's what the car had in it when I got it) starts out all the way lean, then slowly makes its way to all the way rich. It stays pegged on rich for 5 or 10 minutes until the car goes into closed loop, at which ti

i thought this was pretty good....   http://www.youtube.com/watch?v=7N5OhNplEd4

Mon2urbo Name becuse had Monturbo and this is the second one for me   Vehical: 4dr Montero 6g72 3.0L 2v SOHC 4sp auto 4x4 Engine: 88 Starion BS removed non jet ported head (considering roller magna 3rd gen cam) Intake, EGR passages in the intake "plentum" ground out, to kinda make a plentum plus porting. Turbo 12a rebuilt with ported exhaust housing Ported exhaust manifold Will probly run without IC 10psi Exhaust will be mostly stock 3.0 exhaust connexted to a 2.5in downpipe without cats ECU an

I know there have been a few people who said they have converted a 4 wire MAF (86 back) to use a 6 wire 87-89 MAF. I have searched a lot on the forums, but there is no write up/wiring diagrams as far as I can tell.   Also, I know that the 83 has been converted to use the 1G MAF, but are the stock MAF pinouts the same for 83-86 4 wire MAF's or are the 83's using a different MAF pinout from the 84-86's?   I have the connectors and MAF from an 89 so I plan to make an adaptor harness so I don't have