Looking for forged rods, pistons in good shape. As well help from a fellow starquester.   I have no place to work on vehicles or time as well as patience.   Vehicle 1: 88' Starion, swap bottom end, new turbo, get running in good shape, new windshield, brake line going to rear.   Vehicle 2: 88' Max fried rings from turbo needs stronger internals, more fuel, shorter oil feed line, get running better, properly mount fuel tank and stop leaks possibly rebuild turbo dont remember.   Vehicle 3: 98

Ive noticed that my quest has a lack of power after about 4k. It pulls decently before then but doesnt continue to pull. It drops from about 10 or 12ish psi down to just above 7psi. I'm new to these vehicles so im not sure if they're just low RPM blooded beasts or if it has something to do with the waste gate solenoid being actuated by the PCM via the knock sensor.   Any input would help. Thanks -Zach

When one sells out under you, it never hurts to ask the guy if he wants to see you his wife's car   http://i.imgur.com/Lm7Ed.jpg   Only has 32,000 on the odometer too!! stock drivetrain, upgraded audio system, but all done RIGHT!   Ah, it's good to be back

Picked up some ebay specials, BOTH shipped for $56. Still wanted turn downs so I chopped and welded the tips like so. Should shut it up a tad. Had to cover the hole for the silencer so I made little tags. Also did the silencers. Should have my suspension on monday!!! so I can finally finish this up and get them on. http://i177.photobucket.com/albums/w239/johnboy9788/20121128_110855.jpg http://i177.photobucket.com/albums/w239/johnboy9788/20121128_133518.jpg http://i177.photobucket.com/album