Im working on an 89 conquest adding a microsquirt and having tuning trouble could someone help me with a base tune for ms2 extra serial 321 or the ign. or ve tables would greatly appreciate it

Currently the car is on ST lowering springs with OEM insets that are starting to get bouncy. Ive searched a ton and read the DIYs over and over so I know what to do before I do it. My question is do I need the extra set of struts for the threaded portion? I was thinking I would cut the threaded portion out, add tubing to fill in the gap, and re use/weld back in the treaded portion of my front strut housings.     Am I way off here or not understanding the mod? Just asking because I havent looked

TURNED OVER CRANK TILL TDC. DOWEL PIN ON CAM GEAR IS SLIGHTY TO THE LEFT OF TOP DEAD CENTER AND THE CRANK PULL MARK IS LINED UP -10 DEGREES BEFORE TDC TRYING TO REPLACE MY CHAIN IS THIS CORRECT? OR SHOULD THE CRANK PULLY BE RIGHT IN THE MIDDLE AT 0? IS -10 DEGREES BTDC OKAY?

care to chrome or powder coat one ? just want an extra ? $15 shipped via paypal pm if interested http://i154.photobucket.com/albums/s263/aiche_photos/for%20sale/photobucket-2048-1360075318526_zpsc940f65c.jpg