Got 5 pair available....   Polyurethane Shore 80a. These are a little softer than Stedebani's Black bushings and they do not have the grey foam in the middle. I had Stedebani's shore hardness tested on the black ones and they were at 85a. These I made are 80a.       $75 for a pair of tops and bottoms (4 pieces) shipped   http://i156.photobucket.com/albums/t18/gr8white1/Molds/DSC01376_zps5e7ed6d6.jpg   http://i156.photobucket.com/albums/t18/gr8white1/Molds/DSC01377_zps712e183d.jpg   http://i1

been back and forth on installing a stock turbo on the car before I sell it. It's time. Looking for a good condition 12a (not blown, no cracks, ect). Let me know what you have w/ shipping to 79928.

I recently installed a 100 amp stock alternator from ebay. It seemed to charge fine for awhile, but i just recently noticed that it doesn't appear to be providing a charge. I'm wondering, since I removed a lot of the factory harness and relays, if there's something that I need to add back that will regulate voltage or charging? The alternator was providing a charge initially, I'm just wondering if there's something that I removed that would cause the alternator to die or not charge? Is there a w

Hi, I hope someone has an idea on this. 88 conquest. When I take off my wideband reads 17 and the car will stall if you don't fanese it until you get under way. Once you get going it runs around 12 to 14. Under boost it runs at around 11-12. We did check the TPS and it appears to be good. I believe it has a Gen 2 with a K&N air filter. It does have a walbro fuel pump and runs fine once you get going. The problem is only when starting out. Hot or cold it doesn't matter. I am looking for some