This is the POR15 1400* manifold grey coating. It is rated up to constant 1400* temps.  http://www.por15.com/hightempcoatings.html   I wire wheeled my brand new T4 housing, roughed it with some emery cloth. Applied 2 light coats, 24 hours apart, and then put it in the oven for 500* for an hour. At 500 degrees it didn't even phase the coating other than hardening it.   Although that damn cheese from the pizzas on the bottom of the oven sure did smell like crap.   This coating does not cure

56k waring.   http://www.cfecorp.net/aj/new_mods     http://www.cfecorp.net/aj/new_mods/EVC_1.jpg     I built the mount for the HKs out of Computer printer packing foam, it was that color/texture already i just cut it about 1/8" larger then the opening and fed it in from the front, the EVC slip in a hole in the back and sit in there VERY snug.     http://www.cfecorp.net/aj/new_mods/can_2.jpg     The 1G mas is in a custom "echo" can, only covers about 3/4 of the mas, I still need a K&N f

NEW STUFF AS OF 13 AUG 03:  Well 20 buyers are locked in now so you've got one week to get in at these prices.  After 20 August you'll have to wait for another GP or pay full price.  check the current exchange rate on the option you need.  Phone in credit card deposits between 10PM and 5AM eastern time.  There is about a 14 hour difference so it'll be like calling between noon and 7PM over there, and he'll try to be around as much as possible.   Ok guys I'm just going to try to consolidate

Another maybe.  On the heals of Shawn's recent excellent product (which I bought) this would be to fill the void for a somewhat more affordable item.  It is not an adjust on the fly unit like Shawn's.  it is the movable roll pin design, which happens to be much lighter and machined with quite a large adjustment range.  Price would be about $130 for 5 or less $120 for 10 and $110 for 20 or more.  Again, I don't consider it competition for shawn's item.  This is not a piece of the same quality and