All parts include shipping to the lower 48 states. If your in AK or HI shipping charges will be raised. All parts will be shipped UPS ground. Paypal accepted.   "Mitsubishi" embossed 2.6 valve cover. Cover has one chip on the front corner. I ran it on my '88 for a couple hundred miles and it never leaked so its still very useble. Its already modified to fit over the ARP head studs and comes with a good valve cover gasket. $15 shipped. http://i27.photobucket.com/albums/c192/Zoso20000/Mitsu

Bought this from the original owner last summer. 1990 Eagle Talon TSi AWD, 5sp, Pewter Mist Metallic, w/Buckskin Malibu Cloth interior. Car has 120K on it and its completely stock and unmolested. The previous owner must of broke a timing belt because the car has a reman/new head on it along with a new timing belt, balance shaft belt, and water pump. Not bad for $2K. I've been slowly fixing every thing thats been neglected for the past couple years, I've replaced the following so far; BISS,

i went to the electonics store and bought Zener Diode (1watt, 4.3V) and soldered into the ECU pins bridging the signal from the map, and the "sensor ground" and then soldered a bridging wire from "sensor ground" to the main "ground" for the ECU   the best part about using the zener diode is that it allows all the MAP sensor voltages below 4.3V (aka below 13psi) to still function properly. (unlike the resistor type fix that someone came up with)   daily driven at 15psi now, and a couple pulls t

I need black leather seats in really good shape. let me know what you want for them, I live in STL