Thought some of us probably don't know how to check their wires. This is a good way to do the test on any car.   You need an Ohm meter to read Ohms. It is standard on any DVM/Volt Ohm Meter.   Remove the Spark Plug Wire one wire at a time to do the measuring. If they don't come out too easy, you really just need to pull the ends off from the Spark Plug, & Distributor, & or Coil. You can remove the distributor cap and do the check from inside of it to include the wire to cap connectio

Anyone running an RPW Roller Camshaft with the Astron Roller Rockers from www.rpw.com.au?   I just sent an email to David Thomas of RPW asking for specs of the cam.  Earlier in the year, we found that the ratio of the Astron roller rockers is 1.3.  When he returns the specs on the cam, I will know the final lift and duration.   This setup may be more feasible than the Schneider 284RH cam that I currently have because it will not require custom length valves or valve cover lifting.     If anyo

What is the fatest size tire I can put on the rear of my 89 9 inch rim?  Does anyone have 275's on them?

Im going to run a 19c turbo, is chads intake worth the extra money? what horse power numbers can i expect to get with the magna and 19c? chads intake flows more than the magna, but how much?  I went to the magna site, and most of it is under construction. thanks