I am looking at doing this by march of next year hopefully...And I want soem info on how it might run if someone can help me.  Or if I shoudl even think abotu it.   in all cost should be around 1300-1500 if I get a profec on top of it liek I want to.   I found a place that will rebuild a core to a 20g-1a for like 600 bucks with a TD06 wheel.  And teh SDS EIC controller with two injector setup is like 325+160.     Here is my thought.  Place the injectors at the opening of teh TB with a sho

Well, we put the head together at my machinist's shop. He actually let me see everything that was done to this head. It is ready to go on for the 3rd round of testing. Round 1: Not quite enough pre-load. Round 2: Pre-load experiment had a slight glitch, that has been corrected. Round 3: We'll see. We took a page out of the Toyota book by grinding a channel to feed oil through to the rocker shafts. That channel will increase volume to the top. The hole in the block does not line up with the h

Im not trying to start another flame, like the 12sec post. I like most of the other people on here cant afford to run 12s anyway. SO how possible is it to get mid to low 13s.

I've made the first move in getting us some fully custom gauges!!! Read below and check out their site to see examples of what we could get. There's numerous "glowing" colors to choose from, as well as logo's, gauge face/number colors, and choice of reverse or standard glowing styles. As you'll read below we need 20 people for them to start, so start leaving your name and as soon as I get 20 I'll send the gauge cluster to them. It sounds like I will coordinate everything, but you will order dire