.

Im using an Aeromotive Compact EFI Regulator, P/N 13105   http://216.242.145.16/products/product.phtml?p=12   If you decide to use this one, just be sure not to overtighten the 1/16" npt vacuum nipple. If you do, it will pinch the regulators spring and it will not adjust correctly.   Great regulator though. It includes an -6 inlet/outlet and 1/8" npt hole for a gauge.   PS: the regulator out or the box is set to around 80psi, so remember to drop it down or your car wont start.

huh? i guess this is my welcome into the mitsubishi world... how could that possibly happen? my battery is unplugged for now, until i figure out why my foglights could be just on for no reason... the key is on my desk and the car is just sitting there... and if i plug in the battery... foggies are on! what did i get wet? i keep the fog switch pushed in so they will turn on when i flip up my froggy lights at night. i turned the foggeroo switch off and the lights were still on... headlights and pa

I'am trying fit a set of ford mustang cobra-r wheels on my 88 tsi quest. From what info I have gathered on this site, what do I need to bolt them on. The wheels are going to be 17x9 front with (+24mm offset) and 17x10.5 with (+28mm offset) rear. i want to run a 245/45/17 front and a 245/40/17 rear. I know that that bolt pattern is 5x4.5 on the quest and the stang. will the front 17x9 just bolt up with out spacers or a adapter,and will they clear the adjustable 8 way struts. On the rear what siz