I need the dealer part numbers for the following items:   1. Heat shield thats mounts to the underside of hood. (I need both the insulator and the metal shield itself)   2. Plastic clips for the grille by the windshield or as the manual calls it "the front deck garnish'.   Thanks, Jason

I am in need for the seat trim for some black '88 cloth seats. Specifically I need:   *adjustment knobs for one seat *passenger seat release lever knob and hole cover (goes at the side of seat for passengers sitting in the back) *passenger seat side trim facing door panel *passenger and driver seat fore/aft lever and knob *passenger seat recline knob *passenger and driver round cover plate for the plastic trim that faces the center console   I need any of these that apply to include the hardware

June Fest Car Show a potable dyno was brought in. $50 for 2 pulls. First one was without the laughing gas. 245whp, 305WTQ. 2nd run was with the nitrous. The graph shows 286hp and 345tq, but the guy running the dyno started the graph late and the torque was already falling off. The 375TQ is me plotting the line back to the same start as the first run. I had the boost set at 21PSI Torque and power peeked around 3500rpm and the power held to 6000rpm. This maybe incorrect also because I didnt go to

I read the post about jumpering the green and white wires together to get the correct signal for the megasquirt, but I really don't understand how it will work. Does anyone have a picture of the completed magna distributor pigtail ready for install?