all you got to do is get some pvc pipe and a 90 angled to mach i use 2in but that me use what suits you im sorry but you'll have to hack it fit your car needs i didnt mesuer mine       on the 90 you'll have to cut the big end off             any ? ask i'll try to answer

I have installed the sleeved system with great ease. I found the easiest way is to attach the 2 piece sleeved section together. Install it without the clamp. Just hang it. Then Install the Downpipe and center section together., when installing the downpipe 14MM bolts. Spin them on by hand or get them hand tight. Then with a 14MM short socket 3/8 drive and a knuckle. Use a 3/8th's drive ratchet and tighten the bolts on both sides of the DP. It is very easy this way. After that attach the center s

I just put a 1g BOV on my car what is the vac to use i can shift faster that the BOV can worki have it on the 3rd hose like the mod told me to but there it a long dlay like 1 or 2 sec

Like the title says, I highly recommend doing the 1G Mass Air Sensor mod to you quest, like I did.   All I have done for mods is gutted cats, ignitore box mod and turned the boost up to ~14 PSI.     I added a 1G Eclipse Turbo Mass Air Sensor with a Civic intake tube from Autozone, just like the one in Vilification's post in this forum.  I modded the 1G Mass a little.  I used my dremel tool to make the divided bypass section (the short section, not the metered section with the honey comb)  one