Some of you may remember the $10.99 cold air intake for the 1989 Honda prelude. You could get it from ebay and it was a nice fit to replace our accordian pipe. Has not been on ebay for a couple years, but check out this one...   http://www.ebay.com/itm/75mm-3inch-Inlet-Short-Ram-Cold-Air-Intake-Filter-Pipe-Set-Aluminum-/281580467564?pt=Motors_Car_Truck_Parts_Accessories&hash=item418f80f56c&vxp=mtr

We are considering on going to the park. Anyone have a good suggestions on where to go and where to stay?   Thanks,   Tom

Ive waited too long to do this but Ive finally got things started. Turbo is out of the car, having a hard time getting the center and compressor apart but Ill get it(harbour freight snap ring pliers suck!). Ive got all the research done just need help with little bits, mainly what to do with my turbo as it has two very little chips on the compressor wheel. Im also not sure exactly what turbo I have, its most likely an 18g but once I get the turbo apart Ill get some pictures and measurements. Whe

Sold to importwarrior     selling the engine out of my red 88 ~15k miles on the build   $1400 obo + shipping or + delivery edit- 2/9/15 - Delivery will not be possible after 2/20/15   .020 Weisco forged floater pistons shot peened, balanced, lightened, bushed for float rods 10/10 crank NJV head - OS valves - HD springs - Mechanical rockers 54mm TB with ported intake manifold 14g turbo   Will include hardpipes   Will also be pulling the 88 harness, 88 ecu, 88 knock box http://i15.photobucket.com/