Search the Community

alright so just to start off, i finally bought a second starion, i had one a few years ago, bought it, put a clutch in it the next weekend, and then lost my job the weekend after that and had to sell it (been sad about it ever since) so after a few years i finally stumbled back asswards into a second one, this one is an 87 last one was a 86 both widebodys (love the look) so just to start with the list i have recieved on this particular car as told from the previous owner, my research has proved most of it to be true 1. bored out to a 2.8 with weisco pistons 2. non jetvalve head 3.bigger injectors 4.motor, ecu, and wiring out of a 89 (better fuel mapping?) 5. freshly rebuilt turbo with a full straighpipe (turbo elbow, bend to follow under the car, straight out the back, sounds like a damn diesel..... i like it) 6. i was told it was dynoed at 372 wheel horsepower at 20 psi, unverified but it seems like it might make that much, boost is currently turned down the the clutch is well on its way out, a new one is coming in 2 days then we shall find out for sure problems i am having with this particular car 1. super super rich, i assume its due to running 8 psi with bigger injectors, it pulls hard, one little hickup at around 4.5k then it pulls hard again to 5k before hitting what feels like an ignition cut, super loud backfires and flames, sounds like 2 step launch control but otherwise doesnt effect the daily driving of the car at all 2. i have a few broken vacuum ports right off of the upper water neck that i dont know what they are so i cant replace them till i find out (will post pictures) things i would like to this car so like i said i have a clutch on the way, i also have a wideband on the way and a few other gauges, acurate water temp, oil temp, oil pressure 1. i went to a junkyard today and managed to find a narrow body 84, it had a digital gauge cluster in it, i would like to swap my analog one for the digital one, i have searched but only found results for the technica? cluster, i havent found anything for the early model digital clusters, my fuel gauge doesnt work so i would like to swap the clusters if its possible, i have built plug and play harnesses for the nx digital cluster into 240sx's so wiring is easy for me i just need to know if anyone has actually done it and if its actually possible 2. has anyone made or found brackets to mount a single din radio into the stock location? i managed to wedge mine in but i would like to clean it up and have it actually mount properly 3. the same car i pulled the cluster from has rear window louvers, they are mounted on the top but they dont have the bottom latches, where can i find some and do the narrow body louvers fit a widebody car? 4. my car has no floor mats (typical) the 84 at the junkyard has perfect condition red floor mats( matches my perfectly clean interior) are the mats that say mitsubishi on them oem original floor mats or are the oem original ones only the ones that say starion or conquest?

I didn't see a good option elsewhere, so here's the deal. I paid to have a cover panel set up and made, and the CNC design is ready to roll out more for you guys. Prices include what they charge, shipping (around $5) + $5 each to me for gas money to pick up & ship. This is a must if going with Autometer or other aftermarket gauges that don't fit our stock gauge console. You can eyeball and cut one out, but not exact if keeping the turn signals and warning lights working. I'm not making money on this, just want to forward the good fortune of having a buddy that does CNC on the side for reasonable time & materials cost. For those replacing the stock gauge cluster with Autometer or other aftermarket gauges: 1/8" thick, CNC measured & produced black plastic or aluminum 2 bigger holes = 3 3/8" (for tach & speedo) and 3 smaller = 2 1/16" cutouts for turn signals & 9 warning lights on bottom to show clearly. No extra holes for mounting screws/rivot/etc - rear mounts for aftermarket gauges will hold it in place. Would be a great pairing with Outcast Horizon's Radio (what I'm doing ) kit: http://www.starquest...el#entry1088773 PRICING: $55 shipped for black plastic. $100 shipped for each aluminum. more $ for hand polishing of alum too, or could CNC a brushed pattern into the alum! powder coating available for a small price add-on (will get quote if interested) $5 off ship for each additional since they'll go out together. Ex. 2 plastic is $100 shipped, one of each $150, etc. This WILL require some cutting of the stock black plastic gauge front panel and white underlay as this panel will simply cover them, fitting snugly over top. I WILL be documenting the process of installing Autometer gauges with this panel, to show where to cut what, and which wires to use, eliminate, etc. DATES AND PAYMENT: Open for more orders. Please POST what you want here so we can hopefully combine orders when this gets bumped Send Paypal to: mstieg@gmail.com and INCLUDE your SQC NAME & what you ordered with Paypal $$ sent (in comments) so I know who is paying for what. Once received, I'll put in the order & keep you updated. Depending on their availability of material and time, these could take a week or two. (since this is a side job for them, which they are cutting us a great deal on). Any questions please ask!! BLACK PLASTIC: 1. taeisallin - paid & shipped 2. BOHO - paid & shipped 3. Sotty -paid & shipped 4. Conquestech - (2) 5. MTQuest - ALUMINUM: 1. Creakyjoints - (no 5 gauge holes unless notified otherwise) - paid & shipped 2. Skillz - paid & shipped 3. AustinTSI - (center boost gauge hole 60mm) - paid & shipped 4. http://www.26liter.us/gallery/albums/userpics/14392/Gauge_Panels_both2.JPG http://www.26liter.us/gallery/albums/userpics/14392/gauge_panel_3.JPG Another angle to show thickness 1/8" http://www.26liter.us/gallery/albums/userpics/14392/gauge3.JPG

two transmissions 100 each plus shipping one clutch type lsd with axles and torque tube 150 plus shipping!!!! omg the savings are amazing! PENDING SALE two tenzo r bucket seats with harnesses 315 plus shipping obo you have got to be joking!!!!!!! one regular cluster with the trip meter reset still intact?????? does that exist anywhere else? good offer plus shipping one combo digi cluster!!!!! yea yea! (also has trip meter reset!) good offer plus shipping. http://i1275.photobucket.com/albums/y457/akj6400/4%20sale/DSC06107_zps1d03c4a4.jpg http://i1275.photobucket.com/albums/y457/akj6400/4%20sale/DSC06106_zpsb911b6b6.jpg http://i1275.photobucket.com/albums/y457/akj6400/4%20sale/DSC06105_zps112c62a0.jpg http://i1275.photobucket.com/albums/y457/akj6400/4%20sale/DSC06104_zps95c58886.jpg

The one behind the gauge cluster.....

Delete please