Search the Community
Showing results for tags 'Conquest'.
-
Looking for tail lights. no cracks or condesation. any year. thanks -Ryan
-
Small parts list on bottom of this post! Call or text 530-519-8001, email joebeckham08@gmail.com, or pm me here Located in Orland, Ca 95963 just off I5 90 miles north of Sac, 60 miles south of Redding Had a small engine backfire and burned a fair share of the wiring/throttle body area and dash area. Parts that have been sold: -fuel pump -flywheel & clutch -passenger door window -driver door window -turbo & intercooler -rear hatch carpet -PS reservoir -oil cooler -ship wheels -driver's window switch -rear caliper brackets -front sway bar brackets All other parts are still available and are make offer. You pay shipping and PayPal fees Body is in great shape other than the driver front fender. All glass is great except windshield. Mechanical: Has brand new kyb struts front and mookeh rear with adjustable ride height strut sleeves. LSD rear, 5-speed trans, stage 3 clutch, lightened flywheel. Motor had less than 20,000 on it, but would need to be gone through at least to replace gaskets and seals. Brand new walbro fuel pump. Custom full 3" exhaust with no cats and a 4.5" rice can muffler. You would have to make it adapt to your stock or an aftermarket downpipe because the way the person built it. Interior: Dash is no good, headliner is solid, but burned the cloth off. Rear seats are salvageable if you can get the melted plastic off. Rear panels are all perfect. Has the rear wiper fluid reservoir in perfect shape. Power windows and locks work. Hell even the stock alarm worked until the fire happened. Lol Can't really think of anything else. Comment on here or text/call me for more info. 530-519-8001 Here's a small list of some of the items I still have left Shipping and PayPal fees are not included in prices listed unless specified I think the "local pickup only" items are obvious, but some are specified Complete motor (has ARP head studs, 20k on rebuild, will need some new gaskets and seals) pick up only - $200 Complete 5-speed trans, input shaft to shifter $150 pickup only Stock oil cooler - sold Both head light motors $20 each shipped Both fog light assemblies w black trim $50 each L and R rear quarter glass $40 each pickup only Black rear hatch with good shocks $150 pick up only Black right front fender $50 pickup only Hood, needs paint $50 pickup only Complete driver door (good black interior panels included) except glass $80 pickup only Complete pass. door except glass $80 pickup only Black heated mirrors, $40 each Tail lights (river has small sun cracks)- $80 for the pair shipped Black E-brake handle assembly $20 Stock sway bars $40 for the pair Rear diff and torque tube (w/ working LSD) no clue on gear ratio $100 Rear shafts $40 each Rear 6-bolt hubs $50 each Drive line for 5-speed trans $40 Rear Mookeeh MK1 struts (less than 5k miles) - $100 shipped Front KYB struts (less than 5k miles) - $70 shipped
-
I just bought a 1988 Conquest and it is leaking transmission fluid and the guy said that the clutch needed adjusting due to it being an aftermarket clutch. I paid $3200 for the car. He also said the exhaust was an HKS, but it's all rusted. How could I tell if it was really an HKS? Also i guess I'm just asking how this whole forum thing works because I'm completely new to all of this, and if my money was well spent? Thanks for your time!
-
Chome only please. Shipped to 83852. pm me
-
Hey guys been on the forum for a while I'm just new to posting. I have a 1986 dodge conquest technica that I've had for about 12 years. Drove it daily for the last 2 years. It is all original other than the normal wear and tear items. I'm wanting to bore the g54b .030 over and I'm not sure what pistons and rings I need for that bore. Can yall help me out???
-
PM me please Thanks
-
I'm selling my beloved conquest,car was my daily driver everything mechanical has been rebuilt or replaced with new parts. Motor has been rebuilt top to bottom along with a 89 transmission I had rebuilt car has 115k miles turbo has no shaft play and spools up great. Rare Atlantic blue color with no rust period. Only reason I'm selling is because I need the money bad car is almost finished all it needs is the wire harness swapped in and get a respray on the paint sense clear coats almost gone. This car is awesome and it turns heads everywhere I go but times are tough and gotta let the project go. Comes with a garage full of extra stuff including a almost complete brown/tan interior $2000 firm with all extra and rare parts to go along with the car $2500 with the louvers parts and extra set of wheels Located in union sc anymore info or pics pm me I have pictures on Instagram look up @hatchlyfe96 or pm me here and I'll be glad to send more info and pics over text message . CAR MUST BE TOWED!
-
I have a 1986 Dodge Conquest 2.6L Turbo Engine for sale. This engine has been rebuilt and never ran. The head is ported and the engine has been blueprinted and balanced. It also has the following: Forged pistons and rods Knife edged crank ARP head studs Stainless steel valves Heavy-duty valve springs asking $1500 for the engine I also have the body, good condition, immaculate interior, completely restored...body is sand color, interior is red...asking $3000 I really want these to be bought by someone who will love them. Please contact Casey with any questions and for photos. mrs.casey.graves@gmail.com or (904)405-3473 ****I have a bunch of detailed photos, but I can't even load one, says every file is too big...please feel free to contact me, and I will email or text photos right away, thank you****** -
i need 88 6bolt 5 lug axles shaft or shafts for my 88. i hit a curb and bent one. i already have bearings and seal. need everything else. paypal ready. my cars my daily. i need it like yesterday. thanks.
-
I Currently own 4 Starion/conquest car's I've been recommended to join this site by several people since i've been told i've been throwing such a great deal I'm only wanting $4,300 For all my car's Wheels I've heard go for $400 a set All the rear ends are good in all the car's I have 2 Bumpers-Lips White/Yellow, They go for 300 on ebay each uncracked. I also have a Full set of Loovers rear window and side windows Well to start on the car's i only have one title to them, and i'll list it first *Maybe a 88' Yellow and black, engine has been removed and tranny has been removed everything else is there, I have a 5 speed out of my parts car, just haven't thrown it in. 150,000 Mile's *Maybe a 89' Black, 2.4L Turbo automatic i think, 60,000 orginal mile's Need's a head *Maybe a 88' Red, Only running and driving car *Maybe a 87' Parts car tail lights are missing and a few small parts un noticeable, no engine or tranny, I still have the blown engine out of it. I've told several people I would let the parts car go for $550 Since some people have been borthering me about wheels, I don't want to sit any of my car's on blocks, so I'll try to knock that out of the way so you don't brother trying haha. Will ship parts, But it will COST $$$ Will take Detailed pictures Call or text (803)-586-7775 I'm located in Elon, NC - Caswell, NC I will trade all car's for dirtbikes / atv / Stuff to make me money bob cat, tractor / If you have a foxbody coupe shell, you can get any of the starions but the yellow one. Would love a foxbody project 5.0 or coupe, Car hauler trailer, 5th wheel toy hauler, Lake toys - Will throw in cash on a malibu, moomba, centurion, tige, mastercraft, axis, supra, any v drive boats. Pictures are to big to upload
-
I've searched some threads and I can't really find a definite answer to my problem, I found a couple people that had similar issues but I'm still not sure about what I'll need to fix my car. So I was driving home and my car just turned off on me one day driving home, and it would crank but not start. I put a new coil in and it started but then it shut off after driving it for a little. The coil was under warranty and replaced it. It ran fine for about 20 minutes and then it turned off again. I found out that coil coil keeps shorting out and not producing spark. Will replacing the knock box fix the problem? If not, does anyone know what will?
-
This was my daily for I while. I'm slowly starting the process of LS swapping it.
-
I'm looking to LS swap my 1986 Conquest and I'm trying to find motor mounts. Anyone have some or anyone know where I can buy some?
-
I need a knock box for a 86 or 87. Part number verification its MD109942
-
I have an 86 conquest and I was wondering if I can replace my stock knock box with another years knock box? Is there anything I'll have to do?
-
Thread closed. Car no longer for sale. Thanks.
-
I just came across these today. - 16x9.5 +0 - 16x8.5 +0 - 15x9.5 +25 - Come in both 4-lug and 5-lug - Range from $550 to $680 for a full set http://i59.tinypic.com/2dgq5ix.jpg http://ns-wheels.com/images/wheels/nswheels/ns_div_2_black_3.png http://www.odparts.ca/catalog/images/ns_wheels/ns_div_2_black.jpg http://cdn2.bigcommerce.com/server3500/45d7d/products/6636/images/24122/NS_Div2_Wheel_black_scion_fr_s__29961.1410066185.1280.1280.jpg?c=2 Not half bad. *shrug* -
Unfortunately I slid off the road and into a ditch. I am quite devastated. The damage dealt is repairable, I just know that as of now I definitely need a new front spoiler and possibly a few other parts. If you have any parts for the front of a starion or conquest that you plan to sell, please message me here, or text me at 692-239-9547. -
Boring Thread Removed - - Maybe I was sleepy when I thought is was interesting. Thank you all for the well-deserved heckling. Cheers. -
Hi, I am selling my 1986 Starion ESI-R. Silver exterior, black inside. I live in Buford, GA. The cars has 61,400 miles. I drive it on a daily basis and its a great daily driver. I have made some upgrades to improve its reliability. Here is the list. Megasquirt 3 Walbro pump Full 2.5 exhaust including downpipe Engine is bone stock. Still set at factory boost. Not interested in drag racing. Brand New wheels w/ used tires. Brand new Cosmo Racing coilovers. Brand new brakes all 4 corners. Centric rotors and pads. Inerior is in mint condition except for slight wear on drivers seat. Cold A/C! Paint is not perfect. Consider its age but 61k. Im the second owner of this rare gem. Have the original sales paperwork dating late 1985. PHOTOS here https://www.flickr.c.../126801855@N02/ Asking $6000 obo Craigslist ad... http://atlanta.craigslist.org/nat/cto/4617112355.html
-
Hello everyone. I know it seems I don't contribute...... well I hope that will soon change. I am in search of an 88 or 89 Conquest or Starion, prefer 5 speed. I am leaving out Friday after work to look at a 88 White, non running, 5 speed with leather, body in nice shape, and a 89 black, running auto also with leather, front seats need work and both quarter panels have rust..... both are 7 hours away from me but 15 minutes from each other..... Now on the other hand I have found one only an hour and a half away that is also white, not running, auto, with cloth interior. body good shape and a shp car with the stock wheels. Both cars 7 hours away $2k each the closer $3k...... I am willing to drive for one, prefer 5 speed, also I think I would prefer leather, but would really love to find a nice running car......... Your thoughts or maybe you have a lead on a 4th car that is just what I am looking for?????? BTW the 5 speed has been modded and has a Talon MAF and hasn't ran since it was put in. Other than that it has a new head, JE forged pistons, T3/T4 turbo, hard pipe conversion, new crank shaft. all of this is according to the seller..... of course, and a new clutch. Said it would start but not run. It also sounds like a SHP car, has adjustment on rear struts....
-
Parting out 1988 Mitsubishi Starion Orland, Ca 95963 just off I5 90 miles north of Sac, 60-70 miles south of redding Would like to sell the whole thing. Wheels and tires are already sold. Take the whole thing for $500obo. Had a small engine backfire and burned a fair share of the wiring/throttle body area. Wheels, tires, turbo and intercooler are already spoken for. Body is in great shape other than the driver front fender. All glass is great except windshield. Mechanical: Has brand new kyb struts front and rear with adjustable ride height strut sleeves. LSD rear, 5-speed trans, stage 3 clutch, lightened flywheel. Motor had less than 20,000 on it, but would need to be gone through at least to replace gaskets and seals. Brand new walbro fuel pump. Custom full 3" exhaust with no cats and a 4.5" fart can muffler. You would have to make it adapt to your stock or an aftermarket downpipe because the way the person built it. Interior: Dash is no good, headliner is okay.. just burned the cloth off. Rear seats are salvageable if you can get all the melted plastic off. Rear panels are all perfect. Has the rear wiper fluid reservoir in perfect shape. Power windows and locks work. Hell even the stock alarm worked until the fire happened. Lol Can't really think of anything else. Comment on here or text/call me for more info. 530-519-8001 I have no clue how to add pictures, but I can't text or email them to you if interested Thanks for reading
-
I have a complete G54B with turbo. Comes with alternator, a/c compressor, and power steering pump. I have stock injectors from an 85 and 2 trilogy turbo 850cc injectors from an 86. Looking for $450 obo. Must pick up or pay extra for shipping. I also have another complete G54B available for part out.
-
So I had a bad 12a turbo it was seized when I got it I put a rebuild in it (new bearings, seals etc.) I have a 1g bov hooked up to it and a cheap Manuel boost controller along with aftermarket gauge I was running 11psi of boost it worked and ran fantastic pulled hard was doing great then last night (3 days after I rebuilt it) I was racing around and did a burnout I saw my gauge during the burnout it was 9psi then got down to the next stop sign and then started going and my car wouldn't boost it got to -1psi and made a weird deep turbo noise and was like "wowowow" like a howling woosh I thought great I just fried my turbo I drive it home easy and tore into my turbo got the insides out it looked fine the turbine spins free sounds fine feels fine and has a tiny bit of side to side play but it was like that when I rebuilt it to I checked my intake and exhaust housing they looked fine I put it back together took it down the road and it did the same thing I'm lost now what do I do?!!!!
-
Hi All, New to the forums and came across old posts for users selling ported vacuum switches. This was the original post I found with pictures of the part. http://www.starquestclub.com/forum/index.php?showtopic=141609 No one seems to make them, sell them, or have any in stock so Im hoping to get lucky and someone here has one I could purchase? Thank you all for reading and any help you can give me! -RJ
