corbin42511

i know its a little late but anyone still interested?

I have a couple steel braded brake lines.

That should be covered by the recall. Call your local dealer and Give them your vin and they might take care of you

Sweet! The fulcrum pin shim sounds like the winning ticket here! I didn't think of that. I have a used master and clevis on the way and will be pulling the tranny to shim the fulcrum soon thank you all for the info!

Any of you guys in WA?

I needed more throw because when I fully depressed the clutch pedal the clutch was still grabbing. The clutch has been very heavy since I put the new pressure plate in. I figured it was just how heavy the new pressure plate was.

So I bought a fidanza flywheel and a "stage 3 6puck" clutch and pressure plate from someone on here and I threw it into my car as I was overpowering the "stock" clutch that the previous owner had put in the car. I had an issue with the clutch not disengaging completely. So I replaced the clutch fluid and bled the system then I did the zero play clutch clevis mod and then I welded a but on the end ofy clutch clevis to give me more throw... Now my master cylinder shaft that threads into the clevis has bent. Any suggestions?

You have the master cylendar?

Kinda figured with the fact that they are fully rebuildable

I will look there thanks! I was kinda hoping to find someone looking to offload theirs. But judging from what I have heard about them I'm betting I won't likely find anyone...

Anyone getting rid of a set?

You guys have fun maybe I'll catch you at the next one...

Where exactly would the "meet" take place at the fair? I get the fair food and the drifting... but I thought it was more about getting our cars together correct me if I'm wrong.

Tim helped me get my top end issues sorted out for the most part. Now I just have a couple more things to button up and I should be there

I'm in I hope Tim helping me run through my top end this weekend will get it on the road. But even if it isn't running well I'll be there

Brand new in box. I pulled it out of the box once after I had my radiator out and was ready to swap and found it to be for the wrong year. Pics to come soon if you like

You still around Brandon? Haven't heard from you since the 27th...

Oops sorry about the double post and the bad photo link... http://i1365.photobucket.com/albums/r754/corbin42511/IMG_20131119_151252_955_zpsb6d1bad9.jpg

<a href="http://s1365.photobucket.com/user/corbin42511/media/IMG_20131119_151252_955_zpsb6d1bad9.jpg.html" target="_blank"><img src="http://i1365.photobucket.com/albums/r754/corbin42511/IMG_20131119_151252_955_zpsb6d1bad9.jpg" border="0" alt=" photo IMG_20131119_151252_955_zpsb6d1bad9.jpg"/></a> Slowly getting her going and adding a little pink to her insides

<a href="http://s1365.photobucket.com/user/corbin42511/media/IMG_20131119_151252_955_zpsb6d1bad9.jpg.html" target="_blank"><img src="http://i1365.photobucket.com/albums/r754/corbin42511/IMG_20131119_151252_955_zpsb6d1bad9.jpg" border="0" alt=" photo IMG_20131119_151252_955_zpsb6d1bad9.jpg"/></a> Slowly getting her going and adding a little pink to her insides

Just looking for torque tube. Do you still have it and is it in good condition?

And grind? Would love that diff, torque tube, and axels. Pm sent

Would love torque tube and half shafts if they are avail. Pm sent

Looking for torque tube and rear half shafts. Pm sent

Pm sent