88CorpusStarion

PM sent

Thanks

I need the A pillar complete. Cut out at tape locations and along floor inside and the cuts do not have to be clean. Appreciate any help.

I'll take it. Ship to 78414. Send me a PM and I'll give shipping address.

I could use the help. I really need this piece to get the car back on the road. If you cut it at the tape locations and along the floor inside (Prior reply with photo) it does not have to be a clean cut. It really is not a big job. Any help would be appreciated. Aaron

Need an A pillar complete (if not rusted) cut out at the tape marks in the photo and along the floor inside. Does not have to be clean cuts if you cut at these locations. Let me know if you can help. Need this piece to get the car back on the road. Appreciate any help.

I need the A pillar. Here is a picture of where I need it cut. Torching it out or metal saw is fine, as long as you cut it out past the seams and along the floor it does not have to be a clean cut.

I need the drivers side A pillar. If anyone can help send me a PM and I will send you a pic of where I need it cut out. Any help would be appreciated.

I need the drivers A pillar if you can help send me a PM and I will send you a pic of where I need it cut out. Thanks

I need the A pillar complete. Here is a picture of where I need it cut. Let me know what you want for it. Thanks.

You wouldn't happen to have an A pillar for an 88 Starion. Here are a couple of pictures to show where I need it cut. Any help would be appreciated. Thanks.

I am looking Drivers side A pillar. I need the whole thing. Attached are a couple of pictures where I need it cut. I would appreciate the help.

Are we going to get any replies. Would still like a price on complete throttle body assembly, turbo assembly w/wastegate actuator. Info would be appreciated. Thanks

need idler arm and center link for 88 Starion. Let me know what you want for them.

Would like to know if you have the idler arm assembly and center link for 88 Starion. Let me know what you want for them.

Whole drive train is already out, doing a complete restore of vehicle. Thanks for the info.

1988 Starion: When the tranny shifts to 2nd gear it just is not there. If you get out of the gas it will shift into 3rd and OD. Is this a common problem with the trans and is it expensive to fix. Thinking of converting to manual if it is too expensive. Can do the work myself, been a mechanic for 25 years just not a tranny guy. Any info would be appreciated. Thanks

Need idler arm and center link. Let me know price shipped to 78414. Thanks

I am interested in the throttle body assembly complete. Include a price for the turbo and wastegate actuator also. Give me a price shipped to 78414. Thanks

Need idler arm and center link for an 88 Starion. Also looking for a stock turbo and wastgate actuator. If you have them give me a price sent to 78414. Thanks

I am looking for the two side spoilers and a manual transmission cross member for an 88 Starion. I also need the outside window opening trim for the passenger side and a front bumper support. If you could let me know I would appreciate it. Thanks

I have a T5 tranny and will swap you freight for freight if you thrown in the clutch pedal assy and flywheel. I am converting mine to a standard. Let me know. Ship to 78414.

I am looking for a few parts. Here is a list of the parts I need. Let me know how much shipped to 78414. Rear side spoilers if not rusted or distorted Ignition box air filter housing or just the top w/ma sensor either way steering column shaft boots @ fire wall front bumper (metal part not the cover) Passenger side outside window trim (black pieces around the window) turbo and wastegate throttle body assy w/tps Give me a price on the standard trans with clutch pedal assy (including pedal actuating rod, mount and flywheel) I think I am going to convert from auto. Thanks.

I need the Ignition control box (small black box under the hood on the left fender by the coil), I also need the air filter housing with MAS air sensor, the passenger side outside window trim pieces (black trim around the door window), throttle body assembly w/injectors and sensors. I am also looking for the rear side spoilers if they are not rusted or distorted, and the metal frame for the front bumper. May also need some other pieces if the prices are right. Let me know what the price for these items shipped to 78414 are. Thanks. Let me know if you have any questions. Aaron