mike43

I need someones assistance, looking for a 1 5/8 od silicon hose that can bend into a U shape, coming out of the Overhead intake pipe to the air mass. Probably a hose that is reinforced to bend that way. Thanks,

Sent you a pm

Hi, I'm being running high boost and Nos for over 15 years. But I agree that 112k is pushing that engine don't forget with more power you need to add more fuel, and that is way to much boost to run and then Nitrous on top. What I did years ago is add more fuel injectors, secondary fuel computer and for safety added a Nitrous computer which will ensure fuel is up, retard my timing before firing the NOS. But I would definitely invest some more money on the engine before your friend does NOS on it. Mike

Looking for aluminum *DM ahp with ports.

Well, don't move to NJ. One bung weld ten minutes to do, the hole not even opened up properly which I had to dremel clean, was $50 dollars. So to do this pipe and probably not very well would run me at leat $120+

Thanks for the headsup. but unfortunately here in NJ a simple single weld will run you $50. I'm not using my stock airbox but an HKS powerflow, as it is I need to modify it for my synapse bov.

Looking for aluminum *DM ahp with port/s.

Looking for *DM aluminum ahp pipe with port/s

Hi, I'm looking for the *DM ahp aluminum hardpipe with port. Not sure in your pic if its Mookeeh or *DM and if aluminum. zip is 07410 Thanks,

Thanks Dad

Anyone knows diameter of washer hose, and what parts stores carry it. Had a little engine fire and melted. Thanks,

87 to 89 same wiper replacement. ?

I'm looking for the 3" with ports, similar to the *DM one.

Looking for aluminum ahp pipe with ports.

Hi, I just removed the HKS bypass you mentioned when I went with the hardpipes. The hks elbows you mention have a connector for one of the hoses. Now I'm trying to replace these hks elbows and couplers with a hardpipe.

Hi, Just wanted to let everyone know that Redlinegoods reduced their price for the shiftboot to $39. It looks great it takes about 10 days to get from day of order. I believe if we get a gp for it, he might lower the price a bit. But the boot looks great and it's real leather. Mike

Hi, any *DM parts ? ahp alum, ovcp etc. Thanks,

Do you happen to have the 3" *DM ahp pipe in aluminum. Thanks,

Hi, If possible I would like to buy the rubber ball alone to see if I can fix my grinding sound, should fit. Also refresh my memory putting this back together, the inner shift boot goes over the shifter first,then the insulator material, finished by the shifter boot ? shipping to NJ 07410. Regards, Mike

How much for the *DM ahp pipe, is it aluminum ? Thanks,

Looking for aluminum 3in ahp pipe with port/s Thanks

Hi Joe, My short throw shifter mimicks the stock, just mine didn't come with any rubber over the ball, so I have that metal on metal contact. This ball should fit over my metal one, no. This should slip over it right. how much for just this piece my zip is 07410. Regards, Mike