Guest c89zx7r Posted February 29, 2004 Report Share Posted February 29, 2004 GO TO JC WHITTNEY . ORDER THE AFTERMARKET STEEL MANIFOLD FOR THE MIGHTY MAX AND WELD ON THE TURBO FLANGE . COST FOR MANIFOLD IS AROUND 150 BUX Link to comment Share on other sites More sharing options...
89onaquest Posted February 29, 2004 Report Share Posted February 29, 2004 wow, that's what mine made out of 316 SS would have cost. Link to comment Share on other sites More sharing options...
88TSI_Rob Posted February 29, 2004 Report Share Posted February 29, 2004 Do you have pictures? Link to comment Share on other sites More sharing options...
rjf Posted March 1, 2004 Report Share Posted March 1, 2004 When I tried to check this out on the JC-W web site I could not get to a valid aftermarket header. The one that they show is clearly not for a G54B engine. It looked as if it was for a Civic. Do you have the JC-W part # ???? Link to comment Share on other sites More sharing options...
artinist Posted March 2, 2004 Report Share Posted March 2, 2004 very interesting if true. someone find a pic. Link to comment Share on other sites More sharing options...
Questsi Posted March 2, 2004 Report Share Posted March 2, 2004 http://www.jcwhitney.com/webapp/wcs/stores...mp;appId=468134 That's what I found but the picture is def. not it... Link to comment Share on other sites More sharing options...
Indiana Posted March 3, 2004 Report Share Posted March 3, 2004 I think I have seen used ones of these for sale before and they all collect way down the side and back of the block and I don't see how you could use them at all unless you put the turbo under the car. Here's one for sale similar http://cgi.ebay.com/ebaymotors/ws/eBayISAP...;category=33631 http://static.zoovy.com/img/jtoutfitters/H200-W600-Bffffff/22rheader.jpg Link to comment Share on other sites More sharing options...
Recommended Posts