Jump to content

Amuse yourself for a while.


Minagera
 Share

Recommended Posts

something is wrong with the right angle, it keeps showing the right angle at about 115* on me. I finaly used a square and placed the arrow on the square line, and it was off of the supposed right answer by atleast 25*...

 

Any one else seeing that?

Link to comment
Share on other sites

something is wrong with the right angle, it keeps showing the right angle at about 115* on me. I finaly used a square and placed the arrow on the square line, and it was off of the supposed right answer by atleast 25*...

 

Any one else seeing that?

 

 

yup....same here

 

I ran out to the toolbox and grabbed a protractor. typically it looks greater than 90* but once it was like 84*.

 

Maybe it's the fisheye projector on my monitor?

 

 

 

Turborusty

Edited by Turborusty
Link to comment
Share on other sites

something is wrong with the right angle, it keeps showing the right angle at about 115* on me. I finaly used a square and placed the arrow on the square line, and it was off of the supposed right answer by atleast 25*...

 

Any one else seeing that?

 

Is possible your screen resolution and screen geometry aren't matched?

 

My first try through was a 4.53 on my work laptop using a thumb pointer dealio.

 

mm

Link to comment
Share on other sites

Parallelogram--4.0 5.1 1.0

Midpoint--------2.2 0.0 2.8

Bisect angle----9.4 1.7 3.1

Triangle center-11.5 6.2 5.4

Circle center---1.4 2.8 2.0

Right angle-----1.7 4.0 2.4

Convergence---4.5 4.0 1.0

 

 

Average error: 3.63 (lower is better)

 

I got the mid point perfect on the second one. The phone rang on that 11.5.

 

My right angles look pretty good, I bet the monitor has a lot to do with it.

Link to comment
Share on other sites

Ok I was off to an awesome start on this one then I slipped and clicked on the corner. LOL

 

Parallelogram 1.4 389.5 ----

Midpoint 1.0 ---- ----

Bisect angle 2.6 ---- ----

Triangle center 1.5 ---- ----

Circle center 1.0 ---- ----

Right angle 0.1 ---- ----

Convergence 1.0 ---- ----

Link to comment
Share on other sites

my right angles came out to 0.1, and i have an old bubble-glass monitor at 800 by 600
Link to comment
Share on other sites

 Share

×
×
  • Create New...