4bangerT's stock rebuild with garrett t3

[Technology]

Here's the pics, I'm sure 4bangerT can come in here later and give the scoop on the build, I have been helping him, we posted a dyno graph of his. He only runs 10-12 psi from this turbo and is easily over 200whp IIRC, each lb of boost added something like 20 hp. He'll eventually get it dyno'd again with the fresh engine.

 

Here's the frontal shot, the manifold is just mocked up for now because he was fabbing up a wastegate tube from the gate to the downpipe:

http://www.mitsustyle.com/photopost/data/529/medium/DSC02305.JPG

 

Here's the side: the new wastegate re-entry tube, very nice, it'll get prettied up with a grinder and some hot-metal loving.

http://www.mitsustyle.com/photopost/data/529/medium/DSC02304.JPG

 

And here's where it's going. This was MUCH dirtier, but some degreaser and a power washer and elbow grease really transforms it.

http://www.mitsustyle.com/photopost/data/529/medium/DSC02306.JPG

 

Engine now has BSE and a marnel head. Pretty much stock otherwise. Fidanza flywheel, and he modified his oilpan the same as I did to mine. We can do donuts together now.

[BOHO]

Holy huge hotside batman.....

[Technology]

Yeah, it's got size. that's a 3.5" downpipe by the way. This thing is a monster on the highway, the power never ends, he will be able to spin this baby higher now with HD valve springs and a bigger exhaust. I'm fairly excited.

[BOHO]

What kinda #'s yall looking for?

[Technology]

Well, at this point that is up to the stock injectors and intercooler. I think whatever the injectors can handle will be where it stops for now.