BOOSTED88tsi Posted August 8, 2011 Author Report Share Posted August 8, 2011 No I don't blame you, I was really picky about my muffler too lol. Well, f*** the muffler than, just go with a couple of the loudmouth II's in line with each other -JustinIm going to throw the resonator i have laying around on it and the greddy and go from there.He already has that big tail tipped muffle I install DAYS ago, he just needs to drive the damn thing. Withdrawals are a complain!Yeah i need donutz dawg.WHUR MAH VIDZ?! :mad:Tomorrow!Yeah you gotta be pretty close, now it's just the -6 fitting and it's good to go right? Can't wait to see it running http://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-06_17-30-56_641.jpgI had this made as i eliminated the stock fuel filter and needed to get to a -6 but it has the wrong flare at the end to work with my lines so im getting a new one tomorrow. Quote Link to comment Share on other sites More sharing options...
Blue Posted August 8, 2011 Report Share Posted August 8, 2011 So... we're going on 1:45pm here in Ga. I still see no vidz. Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 9, 2011 Author Report Share Posted August 9, 2011 (edited) http://www.youtube.com/watch?v=MyWrSjBjZeoGot another one coming soon.720p dat skank.Anywho it was a pita to get it started. i got the fuel line on at 12 o clock or so and cranked it over. Nothing at all just cranked then i check for spark. Got that, so i throw some starter fluid down the tb. Starts right up, pull the injectors and crank it over. Not one single injector fired. So im thinking wiring start checking crap and i cant find anything bad. Text the dude that did my harness and he says the injectors are clogged. So i pull all the injectors go get some carb cleaner and hook them up to a battery and nothing lol. It was like a 10 minute per injector deal to finally get it them to shoot out anything the stuff that came out was literally green. Got them all done, threw it back together and left the injectors out of the mani to see if they shoot fuel and BAM i had fuel. So put everything back together and it started right up. Time to take it all back apart lol. The motor has been sitting since 03 so its whatever. Edited August 9, 2011 by BOOSTED88tsi Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted August 9, 2011 Report Share Posted August 9, 2011 whens it gonna be driving? Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 9, 2011 Author Report Share Posted August 9, 2011 id say two weeks or so. Quote Link to comment Share on other sites More sharing options...
Blue Posted August 9, 2011 Report Share Posted August 9, 2011 I GOTZTEDED MAH VID! Now I need moar... Quote Link to comment Share on other sites More sharing options...
87TsiOwner Posted August 9, 2011 Report Share Posted August 9, 2011 Love it! Quote Link to comment Share on other sites More sharing options...
TsTKl Posted August 9, 2011 Report Share Posted August 9, 2011 id say two weeks or so. thats how long I said it would take me to finish my wiring three weeks ago. HAHAHAH seriously though, congrads. It sounds like you were so excited in that video you became prepubescent. JK. I've been going through such harsh car withdrawels lately I'm considering putting the stock steering back on the car just so I can drive it. Can you have mark call about the pedal assembly tomorrow? Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 10, 2011 Author Report Share Posted August 10, 2011 Yeah that was my little brother filming haha. Ill try and have mark call you tomorrow! Get your ish done! Quote Link to comment Share on other sites More sharing options...
TsTKl Posted August 10, 2011 Report Share Posted August 10, 2011 then we can see the difference 3.7 liters and no turbo makes, hahahaha Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 12, 2011 Author Report Share Posted August 12, 2011 haha for sure. This happened tuesday, http://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-09_17-59-15_747.jpgtomorrow im bleeding the clutch and seeing if it'll go into gear with the stock master. Then pulling headers and sending them out to get coated. Quote Link to comment Share on other sites More sharing options...
star240z Posted August 13, 2011 Report Share Posted August 13, 2011 Wow nice work!! Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted August 13, 2011 Report Share Posted August 13, 2011 That's gunna be a tight fit for the intake coupler. Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 13, 2011 Author Report Share Posted August 13, 2011 yeah it should be here today i hope and i will modify accordingly . Got the headers at the ceramic coaters hella mad cause i got lazy and didn't drop them off yesterday. If i would have they wouldve been done today as they only run ceramic coating on fridays. WEeeeeak Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 18, 2011 Author Report Share Posted August 18, 2011 http://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-16_17-40-03_185.jpgDropped it off at the coaters aswell. Waiting on headers to get back, and a e-fan. Got the driveshaft today so if all goes well driving should happen this weekend! Quote Link to comment Share on other sites More sharing options...
polarisman14 Posted August 18, 2011 Report Share Posted August 18, 2011 You may have some issues with rubbing there but otherwise looks good! Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 18, 2011 Author Report Share Posted August 18, 2011 On the rad? Im going to notch it as im not using the stock fan. Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 22, 2011 Author Report Share Posted August 22, 2011 (edited) Worked on the car for about 6 hours today... Here's what went down.14" pusher fan mounted and wired. I hope 2800 cfm is enoughhttp://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-21_19-15-34_334.jpgModified the corvette fuel rail covers to work with my heater core hoses, i know there long and ugly but i need a heater and they'll do for now.http://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-21_19-15-21_358.jpgAlso installed the intake which i got back from ceramic coating on friday as well as the passenger side headerhttp://i95.photobucket.com/albums/l150/BOOSTED88TSI/2011-08-21_19-16-12_679.jpghttp://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294489_2321722211011_1488258324_32719925_855430_n.jpg Literally here's whats left..Wire up my tach, wire up my coolant temp gauge, install drivers side header, make the exhaust connect to my 3" cat back, install my drive shaft, install new clutch master, make the trans tunnel, and install all of the front interior. SO CLOSE. Edited August 22, 2011 by BOOSTED88tsi Quote Link to comment Share on other sites More sharing options...
Scotty Dont Posted August 22, 2011 Report Share Posted August 22, 2011 Add a big cam to the list ill buy you one if I have to. Quote Link to comment Share on other sites More sharing options...
Blue Posted August 22, 2011 Report Share Posted August 22, 2011 Add a big cam to the list ill buy you one if I have to.^This.I wanna hear it lope... Quote Link to comment Share on other sites More sharing options...
TsTKl Posted August 22, 2011 Report Share Posted August 22, 2011 make the trans tunnel Let me tell ya bout dat..... Quote Link to comment Share on other sites More sharing options...
Technology Posted August 22, 2011 Report Share Posted August 22, 2011 lol. Cool mang. Quote Link to comment Share on other sites More sharing options...
BOOSTED88tsi Posted August 22, 2011 Author Report Share Posted August 22, 2011 (edited) Thanks i guess hahaAdd a big cam to the list ill buy you one if I have to.Once its been running for awhile. I just wanna drive it already! Let me tell ya bout dat.....Yeah i know haha, im not looking forward to it. Need more soldering btw! Edited August 22, 2011 by BOOSTED88tsi Quote Link to comment Share on other sites More sharing options...
polarisman14 Posted August 23, 2011 Report Share Posted August 23, 2011 I still haven't even gotten the MPI running, it's been a year and a half now...Patience is a virtue, my friend. Really happy to see this is almost done though!!! Ought to be a beast just like the Convette. Quote Link to comment Share on other sites More sharing options...
TsTKl Posted August 26, 2011 Report Share Posted August 26, 2011 then we can see the difference 3.7 liters and no turbo makes, hahahaha noise difference: CHECK speed difference: TBA Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.