19cturbo Posted December 28, 2007 Report Share Posted December 28, 2007 i need the bolts that hold the power steering pump to the motor... well just the size of the bolt will be great and also the nut the goes on the motor mount.... on the top..... i just need sizes i can get them local.. thanks for everyones help. Quote Link to comment Share on other sites More sharing options...
mejuju Posted December 28, 2007 Report Share Posted December 28, 2007 if you tell me the year of the car i might be able to get that info for you at work. Quote Link to comment Share on other sites More sharing options...
Dad Posted December 28, 2007 Report Share Posted December 28, 2007 Nut should be a 10mmx1.25 1 bolt should be 8mm X1.25 to gear cover 1 bolt should be 10mm x1.25 to block. Not sure on the length Maybe only .750 inches long.. , just take your bracket with you to the hardware store. Dad Quote Link to comment Share on other sites More sharing options...
JAinsworth Posted December 28, 2007 Report Share Posted December 28, 2007 1 bolt should be 8mm X1.25 to gear cover Dad 2 required.J Quote Link to comment Share on other sites More sharing options...
Dad Posted December 28, 2007 Report Share Posted December 28, 2007 Jimmy, the bolt that goes in the gear cover is 8mm the bolt that goes in the block is 10mm those are the 2 needed to install the power steering bracket . Dad Quote Link to comment Share on other sites More sharing options...
19cturbo Posted December 28, 2007 Author Report Share Posted December 28, 2007 thanks for your help.. you guys are great Quote Link to comment Share on other sites More sharing options...
JAinsworth Posted December 28, 2007 Report Share Posted December 28, 2007 Jimmy, the bolt that goes in the gear cover is 8mm the bolt that goes in the block is 10mm those are the 2 needed to install the power steering bracket . Dad Randy, I thought he was trying to put the power steering pump on, not the bracket :oops: That is why I thought there was one bigger one that bolted in from the back side and 2 smaller ones that went through the pulley to the bracket Jimmy Quote Link to comment Share on other sites More sharing options...
Dad Posted December 29, 2007 Report Share Posted December 29, 2007 i need the bolts that hold the power steering pump to the motor... well just the size of the bolt will be great and also the nut the goes on the motor mount.... on the top..... i just need sizes i can get them local.. thanks for everyones help. Hmm well Jimmy, you may be right. I think we have him on the run tho. Dad Quote Link to comment Share on other sites More sharing options...
19cturbo Posted December 29, 2007 Author Report Share Posted December 29, 2007 ok my bracket is on the pump i just need the bolt sizes to mount the bracket to the engine... thanks alot. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.