falcosbejo Posted June 12, 2007 Report Share Posted June 12, 2007 Where can I buy B-new injectors? How much? What brand? pls. email me at falcosbejo@yahoo.com, thank you. Quote Link to comment Share on other sites More sharing options...
notfried Posted June 12, 2007 Report Share Posted June 12, 2007 you've been emailed Quote Link to comment Share on other sites More sharing options...
Trilogy Turbos Posted June 14, 2007 Report Share Posted June 14, 2007 Where can I buy B-new injectors? How much? What brand? pls. email me at falcosbejo@yahoo.com, thank you. I sell new injectors. You can also buy them on Ebay. Starting bid at $250.00. Regards,Trilogy Turbos Quote Link to comment Share on other sites More sharing options...
falcosbejo Posted June 18, 2007 Author Report Share Posted June 18, 2007 any cheap one's Quote Link to comment Share on other sites More sharing options...
jszucs Posted June 18, 2007 Report Share Posted June 18, 2007 There is nothing cheep for this car. Lets start with do you know what injectors you need? or atleast the flow rates or color of injector plastic top. Or even the exact year early late etc of your car and we can gustimate. I have one know good 850 and 2 unknow 850s ill see you all 3 for 50 bucks shipped. at worst case you will have to have one serviced and cleaned. (20-40 last I had one done depending on what it needs) and you will still come in way under new. Let me know. You could have both cleaned and done and sell the good one and recoop 40 50 bucks easy. Quote Link to comment Share on other sites More sharing options...
sfc711 Posted June 18, 2007 Report Share Posted June 18, 2007 I too have the 83-86 black top injectors Here are the flow rates, injector numbers and year that they fit. part #......ID..From...To.....Description MD614102 L 6/86-89 580cc, Primary, black, Driver Side of TB MD614036 M 6/86-89 1080cc, Secondary, Green/blue, Pass MD614114 K 2/86-5/86 850cc (2 Required) MD614004 J 2/85-1/86 850cc (2 Required) MD608909 H 6/83-1/85 850cc (2 Required) MD608869 ? Thru 5/83 850cc (2 Required) Let me us know what year car you have. I have every injector but the secondary(green cap) Am trying to secure a couple in good working condition. Later,Gary Quote Link to comment Share on other sites More sharing options...
falcosbejo Posted June 19, 2007 Author Report Share Posted June 19, 2007 Here's the Specs..1986 Mitsubishi Starion 2600 Esi-r (Specs.) -------------------------------------------------------------------------------- The motor has received a full tune up, including updated cylinder head for maximum performance & reliability. The entire motor has received new gaskets and seals. Sensors have been replaced, throttle body has been rebuilt, and the injectors have been cleaned and balanced. The factory turbo has been upgraded to a 14B hybrid turbo for more high end power. The 5-spd transmission is in great shape with no grinding. The transmission fluid has been flushed and replaced 1000 miles ago. The exterior is original Rocky White paint. There is a minor ding on the rear driver side quarter panel, but there is no frame damage and no accidents to the car. All body panels are aligned. The car drives and brakes straight as there are no problems with the suspension, drivetrain, or engine. The interior is a dark red / burgendy color. It is very hard to find an oem widebody Starion 2600 GSR-VR car in good shape, with low miles, that even runs these days. This Starion has a clean title. Exterior Original Factory Widebody Original Factory Paint (Rocky White Color) Interior JDM Honda Del Sol Driver Seat JDM Short Throw Shifter VDO Mechanical Boost Gauge (Replacing Factory Boost Gauge On Cluster) JDM Deep Dish Steering Wheel HKB Steering Wheel Hub Power Windows, Pwr Steering, Pwr door locks, Pwr side view mirror, Pwr antenna, No a/c yet!!! Not installed Engine 86 Starion 2600 GSR-VR 2.6L Motor 89 Starion 2600 GSR-VR Updated Head (Jet Valve Eliminated) 14B Hybrid Turbo (Set at 10psi - More Boost w/FCD) Custom 2.25" Cat-Back Free Flow Exhaust JDM N1 Style Muffler Stress Relieved Factory Turbo Exhaust Manifold Mitsubishi Eclipse Factory Blow Off Valve Mitsubishi Starion Factory Intercooler Mitsubishi Starion Factory Oil Cooler NGK-R Spark Plugs & Plug Wires Accel External Coil Recurved Distributor Rebuilt Throttle Body Cleaned/Balanced Factory Injectors Custom Intake/Filter Setup Fuel Pressure Gauge Mechanical Boost Controller Large Capacity Electric Fan (14" w/Thermo Switch - Runs Cool) New Valve Cover Gaskets (Installed) New Headgasket & New Head Bolts (Installed) New Water Pump (Installed) Suspension Factory 16" Wheels w/Polished Lip 205/55/16 Dunlop Tires (Front) 245/50/16 Bridgestone Potenza Tires (Rear) KYB Shocks (New All Around) H&R Lowering Springs Cusco Front Upper Strut Tower Bar Quote Link to comment Share on other sites More sharing options...
falcosbejo Posted June 19, 2007 Author Report Share Posted June 19, 2007 The 86’s used 2 same size injectors of about 550 cc. The 87-89 used a primary of about 580 cc and a secondary of about 1000 cc. What do you think should I use? How much? Can you email me at falcosbejo@yahoo.com Quote Link to comment Share on other sites More sharing options...
sfc711 Posted June 19, 2007 Report Share Posted June 19, 2007 So which year car do you need the injectors for? If for the 86 you can have both for $50shipped by 2 Day Priority Mail. PayPAl is sfc711@yahoo.com Let me know,Gary Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.