DzNutz Posted March 5, 2007 Report Share Posted March 5, 2007 So I rebuilt the TB on the car with the new injectors. While I was at it I replaced all the screws with purdee SS allen head bolts. Looks good. http://i138.photobucket.com/albums/q272/DzG54BNutz/car002.jpghttp://i138.photobucket.com/albums/q272/DzG54BNutz/car003.jpg I also threw in a set of those RX-7 spark plugs. Has her running super smooth and strong now. Just wanted to throw those pix up for everyone. The hardware cost about $20 total and 20 for the rebuild kit so not bad at all. Link to comment Share on other sites More sharing options...
viaburn26 Posted March 5, 2007 Report Share Posted March 5, 2007 wrong forum noob Link to comment Share on other sites More sharing options...
importwarrior Posted March 5, 2007 Report Share Posted March 5, 2007 isnt there a link for the allen head screw sizes. or a how to on this? Link to comment Share on other sites More sharing options...
viaburn26 Posted March 5, 2007 Report Share Posted March 5, 2007 isnt there a link for the allen head screw sizes. or a how to on this?take your old hardware to lowes or home depot . you can do it cheaper then what he spent on it . Link to comment Share on other sites More sharing options...
DzNutz Posted March 5, 2007 Author Report Share Posted March 5, 2007 isnt there a link for the allen head screw sizes. or a how to on this? I got it from Starquestgarage.com You can reduce the cost by getting aluminum or just plain bolds but I went with the stainless steel cause I thought they looked better. Link to comment Share on other sites More sharing options...
DzNutz Posted March 5, 2007 Author Report Share Posted March 5, 2007 wrong forum noob Yeah I know. Got up early with the baby and aint right in the head as of yet. Mods can move it for me lol Link to comment Share on other sites More sharing options...
importwarrior Posted March 5, 2007 Report Share Posted March 5, 2007 oh yes i remember now. i would do the stainless as well. i just wanted the link for the QTY of screws he posted in there. it will save me time. Link to comment Share on other sites More sharing options...
viaburn26 Posted March 5, 2007 Report Share Posted March 5, 2007 stainless looks good on painted surfaces or unpainted go to lowes and get black machined hardware Link to comment Share on other sites More sharing options...
DzNutz Posted March 5, 2007 Author Report Share Posted March 5, 2007 IW heres the link for you... scroll down and there is a complete parts list of quantity and sizes... http://www.starquestgarage.com/howto/tbhex/tbhex.html I looked at the black hardened steel too but prefered the look of the stainless. Since I painted the TB black. Link to comment Share on other sites More sharing options...
Kellydahman Posted March 5, 2007 Report Share Posted March 5, 2007 I rebuilt two TB's last night. And installed the New Heater Coolant Hoses. Nice job DZhttp://img236.imageshack.us/img236/6139/1009459tp8.th.jpghttp://img236.imageshack.us/img236/4299/1009453ex6.th.jpghttp://img177.imageshack.us/img177/6397/1009457ix3.th.jpg Link to comment Share on other sites More sharing options...
GoFastBeater Posted March 5, 2007 Report Share Posted March 5, 2007 Where'd that hose come from? :shock: :shock: Link to comment Share on other sites More sharing options...
Funky Phil Posted March 5, 2007 Report Share Posted March 5, 2007 You cant fool us kelly! Its obvious you just wrapped the stock ones with electrical tape!!!!!!! J/K Link to comment Share on other sites More sharing options...
Starfighterpilot Posted March 5, 2007 Report Share Posted March 5, 2007 So I rebuilt the TB on the car with the new injectors. While I was at it I replaced all the screws with purdee SS allen head bolts. Looks good. I also threw in a set of those RX-7 spark plugs. Has her running super smooth and strong now. Just wanted to throw those pix up for everyone. The hardware cost about $20 total and 20 for the rebuild kit so not bad at all. Congratulations on a nice job and welcome to the Starquest boards. Spend some time looking at the various forums they will help you out and there is a wealth of knowledge here. Ask and you will get your answer. What looks good is in the eyes of the beholder. BTW, where did you get the new injectors and how much were they? For what it's worth. KEN Link to comment Share on other sites More sharing options...
DzNutz Posted March 6, 2007 Author Report Share Posted March 6, 2007 So I rebuilt the TB on the car with the new injectors. While I was at it I replaced all the screws with purdee SS allen head bolts. Looks good. I also threw in a set of those RX-7 spark plugs. Has her running super smooth and strong now. Just wanted to throw those pix up for everyone. The hardware cost about $20 total and 20 for the rebuild kit so not bad at all. Congratulations on a nice job and welcome to the Starquest boards. Spend some time looking at the various forums they will help you out and there is a wealth of knowledge here. Ask and you will get your answer. What looks good is in the eyes of the beholder. BTW, where did you get the new injectors and how much were they? For what it's worth. KEN Not really "new" here man. Been around the club once or twice. They werent NEW injectors either.... just new to me since I couldnt get the new ones I wanted bein my tax return went to my ex. I did get some new injector pigtails from ebay for 2.50 each though. Lost a spring clip and all the parts stores around here had their heads so far up their... that I made a couple out of paper clips. They work great and cost nothing lol http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7487&rd=1,1 Link to comment Share on other sites More sharing options...
Kellydahman Posted March 8, 2007 Report Share Posted March 8, 2007 You cant fool us kelly! Its obvious you just wrapped the stock ones with electrical tape!!!!!!! J/K It's very thin tape, I got it from Harbor Freight ... Link to comment Share on other sites More sharing options...
importwarrior Posted March 8, 2007 Report Share Posted March 8, 2007 nice wrap job *DM! Link to comment Share on other sites More sharing options...
Kellydahman Posted March 9, 2007 Report Share Posted March 9, 2007 Thanks Link to comment Share on other sites More sharing options...
starion0352 Posted March 9, 2007 Report Share Posted March 9, 2007 i am curious about the rx7 spark plugs i think they wont work different design for rotaries :?: Link to comment Share on other sites More sharing options...
DzNutz Posted March 9, 2007 Author Report Share Posted March 9, 2007 i am curious about the rx7 spark plugs i think they wont work different design for rotaries :?: The plugs are working great for me. Better firing than the originals.Its the 1st gen RX-7 plugs I am using with the 4 prongs instead of the factory 1 prong. NGK part # BR8EQ - 14 Working great. Link to comment Share on other sites More sharing options...
Recommended Posts