thetexan88 Posted February 3, 2014 Author Report Share Posted February 3, 2014 angel, I have some rear calipers. Conquest, Sorry, no jets right now. RWD, I received your email, Thanks, David Springer Quote Link to comment Share on other sites More sharing options...
BC_99 Posted February 4, 2014 Report Share Posted February 4, 2014 Mr Springer, PM sent. BC_99 Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted February 9, 2014 Author Report Share Posted February 9, 2014 BC_99, PM returned Quote Link to comment Share on other sites More sharing options...
Joeschmoe1984 Posted February 9, 2014 Report Share Posted February 9, 2014 I'm looking for a b38 connector/wiring from the car side of an 88/89 car for a swap I'm doing. Also oil cooler w/ lines if you have them. Thanks Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted February 13, 2014 Author Report Share Posted February 13, 2014 Joe, Sorry I don't have the connector but I do have the oil cooler and oil cooler lines ready to go. If you still need them please let me know. Also send me your zip code and I will get a shipped total to you right away. Thanks, David Springer Quote Link to comment Share on other sites More sharing options...
AshyBone Posted February 13, 2014 Report Share Posted February 13, 2014 (edited) I need a new high pressure to low pressure hose for the power steering. Would you happen to have one? Also, I need a intercooler. Stock or aftermarket, don't really care. As long as it fits. The intercooler isn't as important as the power steering hose. Edited February 13, 2014 by AshyBone Quote Link to comment Share on other sites More sharing options...
panzer Posted February 17, 2014 Report Share Posted February 17, 2014 Hello David,I think that I am in need of an 88-89 ECU. If you don't have one of those. I would be able to use a 87. I need this for a manual tranny.Thank you. Shaun. Quote Link to comment Share on other sites More sharing options...
prototype78 Posted February 17, 2014 Report Share Posted February 17, 2014 Do you have a fuel sender unit?? 87-89m Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted February 24, 2014 Author Report Share Posted February 24, 2014 AshyBone, I'm sorry I don't have the PS line right now but I can help you with the intercooler if you still need one. I have a few stock ones ready to go. panzer and prototype, Sorry but I can't help either of you right now. Thanks again, David Springer Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted March 6, 2014 Author Report Share Posted March 6, 2014 1 Quote Link to comment Share on other sites More sharing options...
DMNDSTAR87 Posted March 7, 2014 Report Share Posted March 7, 2014 looking for rear crossmember bushings---just need shells(have poly ones to replace)--lmkthx gig out Quote Link to comment Share on other sites More sharing options...
panzer Posted March 8, 2014 Report Share Posted March 8, 2014 Hello again David,Call me with ECU choises and to let me know the price.(408)416-8282. Shipping to 94025 ca.Thank you. Quote Link to comment Share on other sites More sharing options...
StockRaider Posted March 10, 2014 Report Share Posted March 10, 2014 I am in need of an intake manifold with the throttle body sensors the whole thing, Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted March 17, 2014 Author Report Share Posted March 17, 2014 DMNDSTAR87 & panzer, I wish I could help but I don't have what you need right now. StockRaider, I have intakes and throttle bodies but I don't have one complete. If you end up buildeing one please let me know if I can help you with any of the parts. I'm sure you already know that the thottle bodies are not all the same through the years. Thanks, David Springer Quote Link to comment Share on other sites More sharing options...
speedyquest Posted March 17, 2014 Report Share Posted March 17, 2014 Do you happen to have a non rusty, in good condition passenger side widebody fender? If so how much do you want for it and maybe thoughts on shipping to wisconsin? Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted April 8, 2014 Author Report Share Posted April 8, 2014 I do have rust free fenders ready to go but shipping them is very expensive. I sell them for $65.00 but the shipping would be at least double that. If you have someone here coming that way that can pick it up for you or you want to visit Texas you're more than welcome to come by Thanks, David Springer Quote Link to comment Share on other sites More sharing options...
AshyBone Posted April 18, 2014 Report Share Posted April 18, 2014 Do you have a steering column in good condition? Mind is no longer locking in place so it just floats up and down. I'm going to have to modify it to work with a 240 rack. Quote Link to comment Share on other sites More sharing options...
jmactenn Posted April 18, 2014 Report Share Posted April 18, 2014 PM sent Quote Link to comment Share on other sites More sharing options...
acpowell Posted April 22, 2014 Report Share Posted April 22, 2014 Got any 16 x 7 front 5 lug wheels for a 1987 conquest? Quote Link to comment Share on other sites More sharing options...
acpowell Posted April 22, 2014 Report Share Posted April 22, 2014 Got any 16 x 7 front 5 lug wheels for a 1987 conquest? Quote Link to comment Share on other sites More sharing options...
acpowell Posted April 22, 2014 Report Share Posted April 22, 2014 Or a front air dam preferably red but if not that's fine to also for a 1987 conquest Quote Link to comment Share on other sites More sharing options...
ktownquest Posted April 27, 2014 Report Share Posted April 27, 2014 hello david do you have a spare g54b long block minus the intake? if not could you point me in the right direction? pm me please and thank you. Quote Link to comment Share on other sites More sharing options...
hopefull noob Posted April 28, 2014 Report Share Posted April 28, 2014 Any chance of the connection on the AHP for i believe the oil seperator and the TPS plug. Sensor does need to work, if the connection is still good. -hn Quote Link to comment Share on other sites More sharing options...
thetexan88 Posted May 13, 2014 Author Report Share Posted May 13, 2014 acpowell, I still have the 7's ready to go. ktown & noob, I wish I could help you guys but I don't have what you're looking for right now. Thanks, David Springer Quote Link to comment Share on other sites More sharing options...
dweiss76 Posted May 14, 2014 Report Share Posted May 14, 2014 I'm lookin for the sheet metal pieces that go on the headlights, the ground effect panel from under the passenger door, a passenger fender and a header panel. All with good condition red paint. Let me know if you can help me out. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.