delayed replay Posted May 21, 2015 Report Share Posted May 21, 2015 Has anyone heard of or know about these guys: www.fuelinjectionpro.comDo they have good systems, or is their stuff garbage or what? Link to comment Share on other sites More sharing options...
BuGG Posted May 21, 2015 Report Share Posted May 21, 2015 The company is no more. Link to comment Share on other sites More sharing options...
importwarrior Posted May 21, 2015 Report Share Posted May 21, 2015 yes they are gone. if you want MPI or just a better Fuel system you will need to piece it together. Scott AKA Scott87Star on here builds and sells megaSquirt ECU's and can build your MS harness. he also sells COP's {Coil on plugs} Link to comment Share on other sites More sharing options...
delayed replay Posted May 21, 2015 Author Report Share Posted May 21, 2015 Ok. I ran across the website a couple days ago while exploring options. my distributor doesn't have a tight seal around the cap and sucks in moisture when it rains, which causes the engine to sputter and miss. Those guys had a distributorless ignition setup, and I wondered how well it worked. Plus I wanted options on the injection system in case my injectors go bad. Thanks for the info though. Link to comment Share on other sites More sharing options...
speedyquest Posted May 21, 2015 Report Share Posted May 21, 2015 Wouldn't the cheaper route be to fix your issue? Replace a few cheap parts and then be all good. Link to comment Share on other sites More sharing options...
delayed replay Posted May 21, 2015 Author Report Share Posted May 21, 2015 Probably would be. I put a new dist. cap and rotor on it, but it still lets the moisture get in. A buddy of mine said to spray silicone on it, and that helped, but it still gets in. Any suggestions? Link to comment Share on other sites More sharing options...
tsi_tom Posted May 21, 2015 Report Share Posted May 21, 2015 (edited) Your probably missing the seal under the cap. I haven't been able to find a replacement. Edited May 21, 2015 by tsi_tom Link to comment Share on other sites More sharing options...
SOTTY Posted May 21, 2015 Report Share Posted May 21, 2015 (edited) Mookie has all the parts to go distributorless , crankwheel, dizzy block off, sensor bracket etc, then hit Scott up for the ecu / harness stuff , it can be done using Tbi. Edited May 21, 2015 by SOTTY Link to comment Share on other sites More sharing options...
speedyquest Posted May 21, 2015 Report Share Posted May 21, 2015 What tsi_tom said, it sounds like your missing your seal. Either try and find a replacement which may not be easy or make one yourself. Boom fixed. Link to comment Share on other sites More sharing options...
delayed replay Posted May 21, 2015 Author Report Share Posted May 21, 2015 Oh ok. That would explain a lot. lol I'm still learning how to work on these. I didn't take auto mechanics in school, so I'm getting a crash course in hands on. Link to comment Share on other sites More sharing options...
jamison1970 Posted May 21, 2015 Report Share Posted May 21, 2015 Where's the water coming from? Link to comment Share on other sites More sharing options...
delayed replay Posted May 22, 2015 Author Report Share Posted May 22, 2015 I drove it in the rain the other day. The time before that, I had the small hose from the thermostat housing leaking from not being tight enough. I put a new hose and clamps on and fixed that problem, but if its raining and water gets up to it, I have problems. Link to comment Share on other sites More sharing options...
Edde Posted May 22, 2015 Report Share Posted May 22, 2015 Guys a new pickup coil of any brand will have the required seal you are missing attached to it. And yes it's the only way to get one. http://www.rockauto.com/info/768/LX557__ra_p.jpg Link to comment Share on other sites More sharing options...
delayed replay Posted May 22, 2015 Author Report Share Posted May 22, 2015 Cool! I'll have to check into it. Thanks. Link to comment Share on other sites More sharing options...
BuGG Posted May 22, 2015 Report Share Posted May 22, 2015 Guys a new pickup coil of any brand will have the required seal you are missing attached to it. And yes it's the only way to get one. http://www.rockauto.com/info/768/LX557__ra_p.jpg Yes Edde is correct. A new pickup has the seal built in. Link to comment Share on other sites More sharing options...
Recommended Posts