on4now4 Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) Hey everyone, It’s been a long time sense I have been on here and a lot longer sense I have posted anything. But the day finally came this past weekend that I sold my rally car and with that being said I am just moving. I have lots of parts I have collected over the years and really would rather have the space back in my house. This is going to take me some time because not everything is well organized and I'm not exactly sure a complete list yet of everything I have. So how this will work is I am going to post a few of the bigger items at first and as I proceed to go through everything I will post more stuff. If there is anything specifically you are looking for please just ask I may have it and just have not gotten around to posting it on here yet. How shipping will work. I am a very busy these days and honestly cannot get items shipped right away in most cases although I will always try my hardest to get things out as quickly as possible. I will plan to ship most items on the Saturday after PayPal is received. Also please not all items are listed as + shipping and +3% PayPal fee. I will accept a check if that is your preferred method however I will need the required time for the check to properly clear my bank. Because I'm sure a lot of you do not remember me or are new here please check out my feedback from back when I used to sell vacuum line on here. http://www.starquest...0296&hl=on4now4 Okay here is what I have. 1g Maf + Connector. Everything you need to properly install a 1g. Just take the pins out of your existing connector and push them into this one. No cutting or hacking required.$50http://i129.photobucket.com/albums/p209/on4now4/DSCN0524_zps62da12f3.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0525_zps3e444f62.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0526_zpsfa0262a9.jpg Super 16g Turbo with 3 bolt downpipe. This will bolt right onto your stock conquest however does have a lot of side to side shaft play and minimal in and out shaft play. The person I purchased it from told me it boosts just fine. I never personally ran the turbo because I just never got around to installing it.$350http://i129.photobucket.com/albums/p209/on4now4/DSCN0527_zps18abc27b.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0528_zpsc1db80d4.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0529_zps01063e21.jpg Crankshafts, I have no idea what these are worth. They all have a spun bearing. $100 per piece or best offer.Crankshaft #1http://i129.photobucket.com/albums/p209/on4now4/DSCN0532_zps4ed5faee.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0533_zps447df47f.jpg Crankshaft #2http://i129.photobucket.com/albums/p209/on4now4/DSCN0530_zps7a1593c7.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0531_zps05a57799.jpg Crankshaft #3http://i129.photobucket.com/albums/p209/on4now4/DSCN0534_zps2df9ef5d.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0535_zps4a4520fb.jpg High performance camshaft. I do not know much about this thing. It came in a box with one of my cars and I was never able to identify it. Brand new. $150http://i129.photobucket.com/albums/p209/on4now4/DSCN0536_zpsc91833ba.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0538_zps22be6102.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0539_zps9b9e3ef1.jpg Timing cover #1$50http://i129.photobucket.com/albums/p209/on4now4/DSCN0541_zps872b021f.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0542_zps14682f4f.jpg Timing Cover #2http://i129.photobucket.com/albums/p209/on4now4/DSCN0543_zps49f0827f.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0544_zps04ea0543.jpg Cap and RotorNot sure if this is new but it is in the box so it might be…Make an offerhttp://i129.photobucket.com/albums/p209/on4now4/DSCN0545_zpsf516dc84.jpg Power ste Edited December 21, 2014 by on4now4 Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 Power steering pump, Oil Pump, Trans Mount, Oil filter housing. Make an offer if you see anything you want.http://i129.photobucket.com/albums/p209/on4now4/DSCN0546_zps742154cb.jpg Spec Stage 1 Clutch fairly low miles I would guess under 10,000 but not sure.Was in my blue car only took it out to upgrade to a 6 puck clutch$50http://i129.photobucket.com/albums/p209/on4now4/DSCN0547_zpse59b8a2a.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0549_zpseca613f2.jpg Flywheels$50 or make an offerhttp://i129.photobucket.com/albums/p209/on4now4/DSCN0551_zpsb4ba41a8.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0552_zpsafaac21f.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0553_zps41fa1cdf.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0554_zpsd89198c1.jpg Quote Link to comment Share on other sites More sharing options...
87redcat Posted December 21, 2014 Report Share Posted December 21, 2014 is the clutch a 225 or 240? Quote Link to comment Share on other sites More sharing options...
randy Posted December 21, 2014 Report Share Posted December 21, 2014 What make camshaft is that? Quote Link to comment Share on other sites More sharing options...
tankbob Posted December 21, 2014 Report Share Posted December 21, 2014 Got any misc hardpipes? Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 (edited) is the clutch a 225 or 240?Clutch is a 225mm friction material What make camshaft is that?Honestly I do not know... Below is all the info I have on the cam. http://www.starquest...6 Got any misc hardpipes?The only hard pipe I still have is not a stock pipe. It is a 3" aluminum tube with a 90 bend in it and a tial bov flange welded on.http://i129.photobucket.com/albums/p209/on4now4/DSCN0556_zps3b68066f.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0555_zps18c68152.jpg Edited December 21, 2014 by on4now4 Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 Transmissions all are 87The one on the right shifts great $100The other two are unknown condition. $50http://i129.photobucket.com/albums/p209/on4now4/DSCN0557_zps5c69ce43.jpg Red 87 Seats in great condition.$60http://i129.photobucket.com/albums/p209/on4now4/DSCN0558_zps0e68c64a.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0559_zpsbbb2ae72.jpg Silver doors sold as a pair with mirrors.These doors are in pretty good shape the passenger does have a dent running along it as seen in the picture but definatly fixable.Make an offer. http://i129.photobucket.com/albums/p209/on4now4/DSCN0560_zps186f4bad.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0561_zps3c7df8d6.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0562_zps0973d9f8.jpg lots more to come. Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 Do you have any good injector and idle control value Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) Air dam -louvers - Edited December 21, 2014 by Conquest 1988 Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 Do you have any good injector and idle control valueLots of intake parts and throttle body parts. I have a box of injectors around here somewhere I am currently trying to locate.Let me know what you need and suggest a price for it.http://i129.photobucket.com/albums/p209/on4now4/DSCN0563_zps30cc5889.jpg Air dam -louvers -Keeping the louvers and unfortunately I lost my air dam in a very large waterhole last year. By the time I noticed 25 rally cars had driven over it and it was quite a few miles back. Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) What is the condition on idle control value I see you have three with two plugs ? I need a good condition unit I pick up from the member here and he say the unit is good but went I install in my quest the idle goes up and down I don't want to put money in to get bad part,mi hope u understand my situation. And the injector is it in good condition? I need j -L- M injector Edited December 21, 2014 by Conquest 1988 Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted December 21, 2014 Report Share Posted December 21, 2014 how much each for the trans shipped to 11704? Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 What is the condition on idle control value I see you have three with two plugs ? I need a good condition unit I pick up from the member here and he say the unit is good but went I install in my quest the idle goes up and down I don't want to put money in to get bad part,mi hope u understand my situation. And the injector is it in good condition? I need j -L- M injectorUnfortunately I can not guarantee the condition of any of my electrical parts. I do not have a way to test them and half of them I don't even know where they came from. The best I can do is ship it to you and if it works that's great if it turns out to be a dud I have no issue refunding you except for the shipping cost. how much each for the trans shipped to 11704? Trans will have to be shipped out on a pallet give me a few days to figure that out I have never done it before. Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 how much do u want for the three idle unit with two plugs I'm hoping they all work . But it cool if the unit is no good. That is a good way of doing business, what about the injector did u find it? Include shipping and 3% paypal fee. Give me a good price. Quote Link to comment Share on other sites More sharing options...
deusdeceptor Posted December 21, 2014 Report Share Posted December 21, 2014 Hi, Do you have the hatch privacy cover? If so I would like to purchase it. Also, maybe AC lines and condenser if it is good condition. Thank you! Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 (edited) This is all I could find for ISC and injectors. I think I have more injectors somewhere but idk im sure they will turn up sometime down the road. http://i129.photobucket.com/albums/p209/on4now4/DSCN0564_zps4e43fc8f.jpg Cant give an estimated shipping without an address or zip Edited December 21, 2014 by on4now4 Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 21, 2014 Author Report Share Posted December 21, 2014 Hi, Do you have the hatch privacy cover? If so I would like to purchase it. Also, maybe AC lines and condenser if it is good condition. Thank you! Hatch cover in great condition but needs to be re glued on the edges where the carpet wraps around. pm me an offer.http://i129.photobucket.com/albums/p209/on4now4/DSCN0565_zpsfdf481d4.jpghttp://i129.photobucket.com/albums/p209/on4now4/DSCN0566_zps799ee0c8.jpg The only AC pipe I could find right now... Most I think got thrown away.http://i129.photobucket.com/albums/p209/on4now4/DSCN0567_zps71468922.jpgCondenser I will have to look for although is probably around here somewhere. Quote Link to comment Share on other sites More sharing options...
deusdeceptor Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) Hatch cover in great condition but needs to be re glued on the edges where the carpet wraps around. pm me an offer.The only AC pipe I could find right now... Most I think got thrown Condenser I will have to look for although is probably around here somewhere. Thanks!! Pming u now. Edited December 21, 2014 by deusdeceptor Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) I'm live in San Pablo ca 94806 all the injector is in good condition Edited December 21, 2014 by Conquest 1988 Quote Link to comment Share on other sites More sharing options...
Conquest 1988 Posted December 21, 2014 Report Share Posted December 21, 2014 (edited) Did you get my pm Are you using usps I think priority mail is cheaper if u need ph 1-510-541-1258 thank you Edited December 21, 2014 by Conquest 1988 Quote Link to comment Share on other sites More sharing options...
Mach 5 Posted December 22, 2014 Report Share Posted December 22, 2014 also price shipped for Idle motor.I have had trans shipped all different ways, on a small pallet that is inside a box through ups and just wrapped in a bag then wrapped with heavy duty card board and also with Great Stuff foam... Please keep me updated. Thanks-Jarek Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 25, 2014 Author Report Share Posted December 25, 2014 Got any misc hardpipes? I found another Hard Pipe. http://i129.photobucket.com/albums/p209/on4now4/DSCN0569_zps81c6e778.jpg Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 25, 2014 Author Report Share Posted December 25, 2014 Does anyone need any interior stuff? I am going to start just throwing it away soon. Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted December 25, 2014 Report Share Posted December 25, 2014 (edited) Don't toss any maroon interior stuff! Definitely interested. I'll get at you soonWish you were closer to me, I'd take a pickup load off your hands Edited December 25, 2014 by psu_Crash Quote Link to comment Share on other sites More sharing options...
on4now4 Posted December 25, 2014 Author Report Share Posted December 25, 2014 Don't toss any maroon interior stuff! Definitely interested. I'll get at you soonWish you were closer to me, I'd take a pickup load off your hands ... I did not know anyone wanted maroon stuff. I tossed most of it a year or so ago... Still have the seats in great shape tho your welcome to them if you want. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.