Starionboy84 Posted October 7, 2014 Report Share Posted October 7, 2014 Im replacing the braketubes (front and rear). Enyone knows the partnumbers ?? Link to comment Share on other sites More sharing options...
importwarrior Posted October 7, 2014 Report Share Posted October 7, 2014 you mean the brake hoses? or steel tubes? www.3SX.Com has steel braided ones that alot of members use including me. Link: http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=26556 1 Link to comment Share on other sites More sharing options...
Starionboy84 Posted October 8, 2014 Author Report Share Posted October 8, 2014 I was thinking of the steel tubes. The ones that runs from the brakecylinder to the brakhoses. Link to comment Share on other sites More sharing options...
station Posted October 8, 2014 Report Share Posted October 8, 2014 Why not copper?You pretty much make them yourself. A nice indoor job if you take the old ones off. Link to comment Share on other sites More sharing options...
importwarrior Posted October 9, 2014 Report Share Posted October 9, 2014 if you bend them yourself steel. just get ones that fit an eclipse.get straight steel tube with the thread size that fits an eclipse.get it in the length you need. then bend it to what your needs are. Link to comment Share on other sites More sharing options...
kev Posted October 9, 2014 Report Share Posted October 9, 2014 I sent all of mine to inline tube to have them recreated in stainless. Unfortunately they would not save the program for other customers because they didn't have access to a car to verify fitment. But you can do as I did and send your current ones out for replication...that is depending on your usage of the vehicle. Kev Link to comment Share on other sites More sharing options...
conquestador89 Posted October 9, 2014 Report Share Posted October 9, 2014 there's alot of complaints with them Link to comment Share on other sites More sharing options...
Starionboy84 Posted October 9, 2014 Author Report Share Posted October 9, 2014 ok, thanks guys. Link to comment Share on other sites More sharing options...
kev Posted October 9, 2014 Report Share Posted October 9, 2014 there's alot of complaints with them 3sx or inline tube? Link to comment Share on other sites More sharing options...
conquestador89 Posted October 9, 2014 Report Share Posted October 9, 2014 inline tube Link to comment Share on other sites More sharing options...
kev Posted October 10, 2014 Report Share Posted October 10, 2014 Hmm. I see what you mean. I almost went with classic tube but they didn't return my call at the time I had one line come in wrong, a fuel line, but I determined that it was my fault being careless when I removed the line years earlier But now I have a leak somewhere in my drivers rear. Had the car in storage for months and noted a puddle. Haven't had a chance to look at it yet, just towed it to my new home a week ago. Hoping it is just a joint that I didn't tighten enough Kev Link to comment Share on other sites More sharing options...
Recommended Posts