Matt300ZXT Posted August 25, 2014 Report Share Posted August 25, 2014 (edited) Figured some of my Quest buddies might be interested in this since it's a popular swap. I have a 1JZ with R154 pile of parts I purchased to put in my SC300 and might just prefer to put a w58 behind the stock motor and run it since the motor is healthy and put the money into something else. Anyways, I have a rear sump, non-vvti 1JZ with Driftmotion lightweight pulleys and Driftmotion braced, ceramic coated t4 manifold. It spins over freely and was last run in March, I got it from a local'ish guy who had it in his SC300. Anyways, it comes with an automatic trans that I got with it when I bought it. Parts I've purchased, either new from Driftmotion: 1JZ engine gasket set (Toyota OEM)1JZ timing belt1JZ belt idler pulley1JZ thermostat1JZ hydraulic tensioner1JZ water pump (front half, since it was already in an SC is has the rear half already swapped over)6 NGK plugsToyota FIPG for oil pan sealingR154 clutch slave cylinderR154 braided full length clutch hoseSC300 manual shift boot trim panelSC300 clutch pedal setup Parts purchased from other people new, or used where listed: ATI Super DamperJZ to R154 bellhousingAristo 440cc injectors (used)Soarer auto trans wiring harness in good shape with igniter (used)R154 shifter housing and shift rod (used) http://s50.photobuck...ZXT/library/1JZ There are pics of the motor, I can email pics of the wiring harness, ATI damper, trans, stuff like that which I just haven't loaded into my Photobucket. I've got $3741.03 in it. Obviously some parts won't be needed for a Starion swap, I just copied/pasted the parts list from an email I sent someone. I guess I could separate and sell the engine/gaskets/damper/etc by itself and keep the transmission to put in my SC300 but I'd prefer to just sell it all at once. Let me know if you have offers. I'd also love to trade it all, with the SC300 for a nice Quest and some cash Edited October 1, 2014 by Matt300ZXT Quote Link to comment Share on other sites More sharing options...
GINASQ Posted August 26, 2014 Report Share Posted August 26, 2014 I wish you were west coast Quote Link to comment Share on other sites More sharing options...
Convette Posted August 26, 2014 Report Share Posted August 26, 2014 ^ what he said. I need me some jz for my 240. Quote Link to comment Share on other sites More sharing options...
87redcat Posted August 26, 2014 Report Share Posted August 26, 2014 now that would be extremly cool for the wife's flatty but, no way I can swing that now... Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted September 13, 2014 Author Report Share Posted September 13, 2014 (edited) Bump..slave cylinder, braided clutch hose, and a JZ bellhousing on the way. Still up for sale, might even sell them separately if someone just wants the motor or trans. I could always na-t or auto the 1JZ. Edited October 1, 2014 by Matt300ZXT Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted October 1, 2014 Author Report Share Posted October 1, 2014 I just edited the original post with a list of everything I've got and what I have in it. If you're interested, make an offer but I'm not giving it away. I don't have to sell it, just wouldn't mind if someone came along showing interest Quote Link to comment Share on other sites More sharing options...
Starquest87Jimmy Posted October 1, 2014 Report Share Posted October 1, 2014 (edited) I can trade one of my conquest for your 1jz swap pile. I have three right now, one running. Do you want an auto or a 5 speed mostly stock or heavily modified. Edited October 1, 2014 by Starquest87Jimmy Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted October 2, 2014 Author Report Share Posted October 2, 2014 I would have to have one running, since my Lexus was supposed to be my daily but the auto died, prompting all the parts purchases to swap it (shoulda just bought another auto, waaaaay cheaper). I'd prefer a modded one since that's way more fun, but I know Quests have gone up in price a little lately, so it'd have to be a case by case basis. PM me with what you've got and maybe we can come to an arrangement Quote Link to comment Share on other sites More sharing options...
MainstreaM Posted October 2, 2014 Report Share Posted October 2, 2014 Hmm, Quote Link to comment Share on other sites More sharing options...
yzrider Posted October 4, 2014 Report Share Posted October 4, 2014 1JZ engine gasket set (Toyota OEM)1JZ timing belt1JZ belt idler pulley1JZ thermostat1JZ hydraulic tensioner6 NGK plugs ATI Super DamperAristo 440cc injectors (used)light weight pulleyst4 mani theres a list im interested in. if we can come to a price and i believe we're close enough we could meet half way to do this. let me know a reasonable price really only interested if itll save me a decent amount of money as im going to be shopping all winter long trying to stock up by spring for my build. Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted October 4, 2014 Author Report Share Posted October 4, 2014 Sorry, I'm not delivering it. If someone wants it they can come get it and I'll use my hoist to load it in their truck. As far away as you are, you're probably better off buying from one of the JDM importers in New Jersey or something. However, if you reaaaaally wanna take a road trip, I can come up with a price. Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted January 8, 2015 Author Report Share Posted January 8, 2015 Bump...here's what I can do: Engine only to include: Driftmotion t4 manifold, stock intake manifold/throttle body, stock fuel rail (with Aristo 440cc), power steering pump with Driftmotion pulley, Driftmotion lightweight crank pulley, alternator, starter and rest of Toyota OEM gasket set I haven't installed yet. I've already installed cam and crank seals and the water pump. It comes with Toyota FIPG so you can reseal the oil pan, the rear main once it's installed, and then slap the belt and new tensioner on. It has no wiring harness included, but is essentially a re-sealed stock engine that hasn't been opened up. It comes with an auto trans. $1350. I can sell it with the R154 and brand new unused Spec light steel flywheel and Spec stage 3 clutch kit, I paid $800 for this and a brand new 1JZ bellhousing. All you'd need is a shifter for the transmission, then the shifter housing modified to fit if the Quest setup needs that. I know SC and 240SX installs need it lengthened, not sure about Quests. I'd take $1400 for the transmission setup. If someone wanted both, I could mix the 2 together. There wouldn't be much of a combo deal as I've already knocked some off of what I paid for the parts, even though they've never seen action. If someone wants just the motor that's fine as I could always put the transmission behind my stock SC300 motor in an na-t setup or just buy a VVTI jz motor instead. Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted February 24, 2015 Author Report Share Posted February 24, 2015 If someone comes by the end of February to buy the motor, I'll sell the motor set by itself (motor, auto, t4 exhaust manifold, power steering pump, lightweight pulleys, alternator, starter, and rest of gasket kit) for $1000. You'll have to source your own injectors and a 5 speed if you want to run that. $1200 if you want the Soarer efi harness and igniter. The belt is on and tensioned, still in time. Oil pan has been resealed, fresh front/rear mains installed, fresh cam seals installed, etc. Quote Link to comment Share on other sites More sharing options...
Mizzark15 Posted March 18, 2015 Report Share Posted March 18, 2015 willing to part ATI separately? lmk Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted March 18, 2015 Author Report Share Posted March 18, 2015 Not unless someone buys at least the motor first with the pulleys I got with it. If I can sell it, then the damper would be of no use to me, otherwise I plan to use it. Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted April 25, 2015 Author Report Share Posted April 25, 2015 I did a leak down test on it and did find out 3 of the cylinders (if I recall correctly) had more than average leakage past the valves. So either they're stuck a little from not running in a while or there may be some carbon build up on them preventing them from fully closing. It's probably best to pull the head and get a basic valve job, then toss in some ARP studs, install the OEM head gasket that's in the kit I've got and throw the boost at it. Just wanted to disclose that information. Still looking for cash or might consider trading for/towards a second Quest if someone has multiple cars and wants a JZ for their main car. Quote Link to comment Share on other sites More sharing options...
Matt300ZXT Posted May 3, 2015 Author Report Share Posted May 3, 2015 I've found a motor for my 300ZX I'd like to have, and think I've got some guys lined up to buy the R154 swap separately, so if someone wants the motor itself and the auto that came with it (don't know anything about it), they can have all the motor related stuff for $1400 but I need to move it quick. 1JZ (I'd pull the head to do some ARP studs and a basic valve job and have the stem seals I've got installed)Remainder of the OEM gasket set that hasn't been usedAuto trans w/ torque converterATI SuperdamperPrecision t4 turboDriftmotion t4 coated manifoldAristo 440cc injectors I think that's a fair price since 1JZ auto motorsets hover around $1500 and you still need several hundred dollars worth of maintenance parts purchased and installed, as well as having worn out twins and small injectors instead of a big sexy name brand turbo, and you'd still have a crank pulley that's prone to separating and falling apart due to Toyota's great idea to make the crank pulley 2 pieces. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.