bigjoe Posted March 30, 2014 Report Share Posted March 30, 2014 Some guy with a mr2 wants to buy my wheels but doesn't kno if they will fit has any one tryed them ? I kno the backs will fit I think but I hear that the front will rub the caliper I just some one input on the subject Link to comment Share on other sites More sharing options...
MotoCam360 Posted March 30, 2014 Report Share Posted March 30, 2014 If the bolt pattern fits, then why not just get the right size spacer to clear the caliper? Link to comment Share on other sites More sharing options...
Skullzaflare Posted March 31, 2014 Report Share Posted March 31, 2014 probably a better question for a mr2 forum lol, i mean dont get me wrong, i know starion wheels fit all around my conquest, but its a mitsubishi lol Link to comment Share on other sites More sharing options...
DurbenQuest Posted April 3, 2014 Report Share Posted April 3, 2014 Bolt pattern is the same. And considering that the sq wheels have a pretty low offset they fit about everything that didn't have big brakes but might poke past some wheel wells. Worth test fitting and taking pics Link to comment Share on other sites More sharing options...
boostd92 Posted April 3, 2014 Report Share Posted April 3, 2014 I come from an MR2 background. I had nearly flush wheels on my car and the specs were 17x7.5 +35 and the rears were 18x9 +44 Knowing the factory SQ wheel widths and offsets you can see where they would set compared to mine. I maybe had 3-5mm to give in the rears, and 3mm in the front Link to comment Share on other sites More sharing options...
Recommended Posts