Jump to content

1988 Conquest TSi-no motor


TSI88Conquest
 Share

Recommended Posts

Looks like I have to sell this to pay for school. Stupid solid '88 TSi from Arkansas. No rust/rot anywhere. Body ok, have an air dam for it, its beat up but together. The paint is faded and was repainted at one point, has a crease on the pass side 1/4, dent in lower pass door as well as near the bottom of the window opening on the same door. Side spoilers and outer 1/4 trim off, to have the 1/4 windows resealed..haven't gotten to it yet. Interior is ok, will need door panels, rear half is apart so the 1/4 windows could be resealed...have pretty much everything needed to put it back together. Has resealed hatch hinges as well. Obviously is a project, driver door window regulator needs work, window doesn't go up all the way. All brake flex hoses, and clutch flex hose are dry rotted to the point of needing replacement. Gas tank drain is seeping. Half shafts both have torn boots. Brake rotors need to be replaced or turned, needs pads. E-brake still works good. Has my old TSi 8" rear wheels up front right now, but you can have them or the 7"s it came with, which are on my Dad's flatty. Has lowering springs in the rear. Has a clean PA title in the previous owner's name. I'm being as descriptive as possible, any other ?s call or text me at 716-560-5021 or PM me on here. To be honest I paid $700 for it in Feb with the motor apart, thats what I'll take now. Motor is not included. Good car to swap shells or make a race car, which I will do If it doesn't sell. Thanks for looking. What you see is pretty much what you get.

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4643_zpse492b3ef.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4642_zpsb77a49cb.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4645_zps49111b7c.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4644_zps42ad43b8.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4648_zps348a50fe.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4649_zps3dc0f406.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4651_zps7fe45523.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4650_zps6d604bf1.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4652_zpsa10fa956.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4653_zpsf39a70f2.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4654_zps1594c35c.jpg

 

http://i101.photobucket.com/albums/m52/Kenmonster20/DSCN4647_zps50bbc48b.jpg

Edited by TSI88Conquest
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
Ok guys change of mind, Had some luck at a Crash A Rama event, won some money and bought myself a new car...so I have to sell this and all the parts I have for it....Have a rebuilt motor that needs to be assembled, new pistons, rings, bearings, ect. New gasket set, new non jet cylinder head, rebuilt turbo. Needs to be assembled! Coke has it now, but I have lost all interest, hence why I bought something. Have $1400 just into machine and assembly work into the motor, not including the gasket set and what not. $1500 takes everything including the car, which is rust free as you see. Call/text 716-560-5021. Need it out of the driveway. It is in Buffalo, NY 14220. Thanks!
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...