Jump to content

My 87 conquest hesitates at 3500 rpm


Austinbond1994
 Share

Recommended Posts

check the vac advance.

get a clean vac line hook it up to the vac advance and either suck or blow on it. if it is like

blowing through a straw then it is bad. replace it. if it hold pressure or vacuum it is probably good.

Link to comment
Share on other sites

  • 3 weeks later...
Around 3000rpm and boost coming up same thing happened when I accidentally dislodged the electrical connector on top of the power injector. One day it ran fine, the next day it was like I ran into a sand trap. I had been checking vacuum lines and must have hit the connector. Edited by Greg23
Link to comment
Share on other sites

  • 2 weeks later...
 Share

×
×
  • Create New...