Full car part out 89 Quest, Performance and OEM, some rare!! Whole car for $1500 with all listed parts!

[Dodge2004srt4]

Car is nearing its time siting at my house, the neighbors suddenly want it gone and Ill be pulling what I can in my current condition to save whatever is possible. The interior is now available to anyone who needs a part that isnt hard or heavy. Everything else I will try to pull and store before they decide to tow it. I wrecked my 2013 Dodge Dart at a 60+MPH crash into a dead stopped pickup truck so I am slowly regaining my strength.....perfect timing from my A-hole neighbors. Locals are welcome to come grab what they want and since they will be pulling what they need, they will get the best price for their added work. Sucks but events in my life never work out in my favor when one hits they all do in sets of 3 or more.

 

I've done a lot to this car over the last 2 years and I hate to part out such a nice 89 Quest but I have to make my money back one way or another. Parts listed without a price mean I've listed it as info for whole car purchase and may sell it later on, I can put you on a list for that in the future but I cant have fluid leaking out and I have to part this out fairly quick since its on a public street. Anything exterior will have to be sold and pulled around the same time as the car is nearing getting scrapped or sold, can have body parts missing sitting on a public street, it will get towed.

 

Im now in school full time and I work full time so I may not be able to jump right on like I used to be able to and answer all questions or get things shipped out the same or next day either. You will have to allow me some time to get things done. I do not need to sell this or part it out in a single day or any rushed time frame so Im not in any hurry for the reasons I just gave. Thanks for understanding and if you do have a time frame that needs to be met, please tell me ahead of time. Added: 2/27/13 Sundays I pull parts and box them up along with laundry, and grocery/misc shopping, Tues/Thurs are the only days I can ship parts with a whopping hour window from school to the post office before they close. That is how limited I am. When you are ready to purchase a part or parts I will let you know if there is any delay with those items and if there are any orders in queue needing to be fulfilled before I can start on yours. So you understand the time frame, unless I can get it done quicker, which I always aim for.

 

I will be done with school as of May 18th and that will allow me to get more done, although I will be starting a part time delivery job but I will still have much more time for pulling parts and shipping them in the next couple of weeks.

 

Interior:

The full interior minus the front seats are now available, PM me with your parts requests, I cant do anything too heavy to remove but Ill do my best! Rear seats have the rare over the shoulder seat belts, everything is Black and sport leather.

Autometer Carbon Fiber series fuel pressure gauge, full sweep, electronic with sender and harness. $150 shipped

3 gauge holder for center bezel, guessing its black painted lightweight steel. $25 shipped.

Gauge hood switch overlays in white and blue. New and unused. from N8 $20 shipped each set.

HVAC overlay new and unused from N8. $75 shipped with HVAC face plate that's in very good cosmetic and perfect functional shape or $25 shipped for the overlay and $50 shipped for the HVAC panel.

LED dome lamp, custom made not Chinese crap, OEM cover. $15 shipped.

LED door lamps, custom made. $20 shipped pair.

Conquest OEM floor mats one passenger side, and one driver side, little bit of wear from the heel, just a little, 8.5/10 driver, 9.9/10 passenger side $80 shipped.

Will have to pull the speakers out cause I do not remember what they are so Ill list them later if it gets to that, and they are worth listing.

Custom LED hatch lighting mounted under Deck cover (cant remember proper term for it.) LED strip cost me over $70 plus several hours to install hidden. Might keep it just for the momento. $100 picked up with cover.

Everything in this interior is complete minus what you see sold, and a 9.5/10 or better, the seats have some normal and light wear, no holes. Not pricing anything individually at this time, you can tell me what you want in PM's or for now Ill sell as a full set. Black leather with the sport seats and over the shoulder rear seat belts. All 1989 parts. $750 for all from the dash to the rear carpet panels covering the jack, and tail lamps.

Stedabani short shifter. $145 shipped.

Blue round 8 ball style aluminum shift knob, looks just like the 2003-2005 SRT-4 knob but anodized blue and not plastic. $30 shipped.

OEM leather wrapped shifter bezel, custom work done. $40 shipped.

8 LED glove box bulb Plug and Play. $10 shipped.

 

Engine/Trans:

89 Knock box, ignition control module $65 shipped. I have a second one for $55 shipped from an 88.

1G MAF with 3in Polished aluminum intake including the red silicone couplers and clamps for a stock inlet turbo w/brand new K&N filter, or you can use it on a larger compressor inlet without the reducer coupler. $160 for full package as listed Will sell intake and MAF separately but they are meant to work as a unit.

AJUSA Head gasket fitted between the head and block and hand tightened, not used but had marks from being stored with the head on itl $40 shipped;

ARP head studs, used for less than 300 miles. $75 shipped SOLD I have another set available for $65 shipped, no issues with them either.

950cc/750cc LSP injectors, 3500 miles on them, work great and have new o-rings installed 2 months ago. $120 shipped

Unorthodox racing UDP red for AC PS and Alt. Includes Dayco polycog belts that are brand new. $140 shipped.

MSD coil, bought this summer, not even 500 miles on it. $30 shipped.

NGK blue plug wires 7.5mm, again very new. $20 shipped.

Red silicone heater and radiator hoses from MK1 5 piece set, perfect shape. $65 shipped.

New Clutch slave cylinder. $40 shipped.

Fairly new ACT stage 1 disc and Heavy duty pressure plate, good to over 400WTQ and held fine. with new pilot and throw out bearing with lightened OEM flywheel weighs between 20-22 pounds. $275 shipped all, west coast add $25 for shipping, the other 2 states contact me for shipping.. SOLD

5 speed with the 89 trans pan, all gears work perfectly. $160 pick up only.

Braided steel clutch slave line, and braided clutch master line installed 500 miles ago. $75 shipped.

New with 10k miles on it clutch master cylinder. Not sure I even want to remove it to sell.

all 4 fusible links replaced 2 months ago, not even 200 miles on them. $25 shipped.

New Optima red top battery group 75/35 $90 picked up, these are $175-200 new anyway, will ship since its sealed as long as UPS or USPS will accept it. Actual costs of shipping will be added to price which is the most fair option I can think of for both parties.

Hard pipes from turbo to IC and from IC to throttle body (wrapped with header tape) with Greddy BOV and red silicone couplers with worm style clamps and 2 t-bolt clamps for the throttle body connection. Can include all the pipes from end to end minus the intercooler for no added cost. $200 shipped.

Turbosmart Boost controller, manual, black, works great $65 shipped. (Like this one but black)

http://i.ebayimg.com/t/Turbosmart-manual-Boost-Controller-/00/s/MTIwMFgxNjAw/z/NgQAAOxyjK1RBg-1/$T2eC16hHJHQE9nzEzufmBRBg-1t4G!~~60_14.JPG

Cruise control Servo/actuator still works perfect and installed, complete. $50 shipped.

Washer reservoir still complete and working. $40 shipped.

Polished 89 inter-cooler. $75 shipped.

Re-Rodded radiator with new higher pressure cap, no leaks and car never gets above the 1/8-1/4 mark on the gauge, includes both OEM fans that work great and working thermosensors for the fan relays in both higher and the lower temps. $185 shipped for whole assembly.

10in Panasonic electric high speed misc fan, can be used as a pusher or puller, 12v. $50 shipped new, cost me $85 and never installed it.

Polished valve cover, no lettering, brand new gasket and seals. $85 shipped.

3in cat-less down pipe (has a repairable crack near top) can have it fixed upon payment or you can fix it, exhaust with flowmaster tip on a Magnaflow muffler with extra o2 bung for wideband. $200 picked up only. If someone really wants it shipped, I will have to find out how it needs to be packaged for shipping and the cost will be charged to the buyer as actual costs for shipping and handling. Recommend local pickup to save buyer money.

Rear 6 bolt axles in perfect shape minus dry rotted boots from sitting the last 2 months, I tugged on them and they tore.

Also limited slip diff, tube and drive shaft $500 for all, picked up.

6 bolt axles without the extras, will need new boots, $175 shipped.

 

Suspension/Brakes

Newly replaced relay rod and all the tie rods with Moog parts. $150 shipped.

TEP front strut bar, black angled so you can install an engine without removal. $165 shipped. Was $245 new shipped and have original receipt.

KYB front struts new 5k miles ago. $200 shipped with housings and springs, $275 assembled with springs with MK1 pillow ball fully adjustable mounts.

KYB adjustable 5 way rear MR2 struts in the MK1 housings with rear springs. $275 shipped.

New Moog ball joints both sides. MK1 poly bushings in front control arms and rods. $150 for arms and rods w/bushings.

Pitman, idler arm replaced along with steering box about 20k miles ago, maybe 4 years ago tops. $150

All lines and pump in good working order, no leaks. $100 shipped.

Rear rotors cross drilled and slotted. $69 shipped.

New front and rear pads, Both rear calipers work, LR painted red, RR caliper replaced with a zinc plated Beck Arnley and not painted., fronts are both in working shape and painted red. $100 shipped for rears with pads, $100 shipped for fronts with pads.

Front upper adjustable pillow ball strut mounts from MK1, new maybe 5k miles ago. $100 shipped.

 

Exterior/lighting

LED front turn signal bulbs, 18 LED amber. $25 shipped pair.

Hella H4 headlamp housings with 8000k dual hi/low beam HID installed, also have 3 extra sets of spare bulbs that are brand new for the hi/low models. 4 bulb sets total. Ballasts are the slim design, size of a credit card. $200 for all, will sell without the extra bulbs or with fewer for a cheaper price.

H3 HID kit slim ballasts for fog lamps, 8000k temp to match the headlamps with no spare bulbs. $75 shipped.

Front side marker bulbs 5 LED amber. $25 shipped.

Rear backup lamp bulbs 15 LED white. $25 shipped.

Front air dam/bumper no cracks or chips and hasn't been repaired as I can tell. $200 picked up air dam, $100 bumper.

Header panel is perfect minus a small dent in the upper driver side from a plastic post on the highway. $100 picked up.

Rear tail lamps I've been told by many these are in pristine shape. $125. Have an average to nice set for $80. Pics will help you decide if the average ones will be good enough, unless yours are broken...then either will do.

All windows are tinted 15-20% been told by tint shop.

Added Custom Fog/Turn signal housings with the clear shaped acrylic made by a member on the forums some time ago. They are in cosmetically perfect shape, no cracks or chips in the lens. They were made so that the full lens was clear and not the yellow part over the turn signal. Not sure what these were new but since I havent seen a set lately I will ask for $180 for the pair. Pics on request and as always PM me your email addy. These wont include anything other than the lenses and and random connectors that are supposed to be a part of the assembly. $180 shipped for the pair.

 

Wheels and tires.

One set (4) 205/55/16 Michelin Pilot Alpin PA3 V rated tires, brand new with about 1000 miles on them, great rain and cold traction, never drove these in snow but I've owned these tires on a heavily modified SRT-4 and made it through 2 feet of snow. Cost $700 alone. $350 picked up. Will ship these for actual shipping costs.

 

One set of SHP wheels, fully polished and all the lips inside and out were professionally refinished with 225/50/16 front Kuhmo XS and 265-45-16 rear Kuhmo XS tires with about 500 miles on them. Work to the wheels were $600 and the tires were $500 alone. SOLD to Rico for $1000 picked up shipped and delivered. Including one set of polished aluminum center caps with a nice bead of silicone to keep them from rattling like they were doing, these were made by Starquestrims, Mark V.

 

Misc.

Brand new OEM owners manual in plastic protective bag. $50 shipped

Both FSM books in very good shape. $90 shipped.

Included with vehicle purchase or with shell once parted.

All receipts for everything I purchased and other receipts from previous owners.

Brand new OEM clip assortment for inside head panel, cowl, etc and spare OEM copper washers, nuts, bolts, ect.

 

Much more I'm sure I cant think of yet.

Whole car as is. with extra parts not listed, minus whats been sold.

$1500 with clean and clear title, no lien.

 

Added 4-13-13

Passenger side window lift motor, very low miles, and works fast and well, $30 shipped OBO.

Drivers side seat belt motor, very low miles and works well, quick as long as your track is clean and lubed $30 shipped OBO.

 

Set of (4) .020 Over-sized 8.0:1 Wiesco pistons. $225 shipped They are in near new shape with under 300 miles on them. Have 3 good race prepped rods on them and (3) sets of ARP rod bolts installed. One rod is no good, same with the ARP bolts for that rod, Rods are included with pistons free whether good or not, they look to be OK but you will need to check for any wear that possibly occurred. the one rod was not getting any oil to it but the other 3 seem to have been. I would only count on spending the money for the Pistons and ARP rod bolts and then order one ARP rod bolt, (they are sold individually and will save you some money).

 

PM me with questions or picture requests, include your email address for pics and for questions please PM me, DO NOT POST. I do not wish to have 10 pages of "do you have X part". I do not have it unless its listed and if its part of the interior then I expect you to PM me as requested. If you dont see something listed here please PM me to ask if I have it, but please dont waste my time asking for something that you only want to pay $5 for but will take me hours to remove and cost $30 to ship, it wont be profitable for me and you wont end up getting the part, so try buying something in the list or several things that are related to what you want.

 

Thanks all,

Chris.

Edited May 5, 2013 by Dodge2004srt4

[JohnnyWadd]

Hard pipes from turbo to IC and from IC to throttle body (wrapped with header tape) with Greddy BOV. $250 shipped.

 

pics? interested

 

Steel braided brake hoses.

 

8 peice or 4 peice

[MotoCam360]

Not sure if you saw the recent drama in your GP post, but you might want to go handle some business over there and clean up some loose ends....for what it's worth

[Heatmiser]

89 Turbo distributor with new o-rings and rebuild components, perfect working order, new cap and rotor. $75 shipped.

 

Pm'd

[Dodge2004srt4]

Not sure if you saw the recent drama in your GP post, but you might want to go handle some business over there and clean up some loose ends....for what it's worth

Ive said enough about that, and those that would actually listen already know whats going on, the rest just want to keep screaming with their fingers plugging their ears. Ill take care of things but Im not having anymore pissing matches.

 

Chris.

[Dodge2004srt4]

Updated sold parts.

[Dodge2004srt4]

Updated and added pics of the wheels.

 

Chris.

[JohnnyWadd]

still waiting on pics to my email

[Dodge2004srt4]

still waiting on pics to my email

Wow, Johnny! You were the very first person I emailed pics to. Ill find it and resend it after I verify I put the correct address. Send me an email at dodge2004srt4@hotmail.com if you dont receive anything from me in about 5 minutes. That way I can reply to your email and hope that you get it this time. I wonder if it went into your spam folder or something. Sending it now. I guess if this doesnt work I can always post them in the thread from my photobucket account.

 

Chris.

[WBS87]

I am interested in your front struts. Will they fit a 87 widebody? I am in N.Z and only after the stubs and want to cut down for D2 conversion. Can you email me please s.t.melhuish@xnet.co.nz

[Dodge2004srt4]

I am interested in your front struts. Will they fit a 87 widebody? I am in N.Z and only after the stubs and want to cut down for D2 conversion. Can you email me please s.t.melhuish@xnet.co.nz

You should look for someone selling just those from a parts car, I wish to sell mine as a set which you are welcome to do, but I dont want parts laying around anymore than I have to. I have a friend who would buy the whole thing in a week.

Chris.

[lionking]

 

Bump

Edited February 15, 2013 by lionking

[Dodge2004srt4]

Whatever you say, Im sure the list of people not getting their parts is close to zero, and Im paying off the loan on the car and the debt Im legally bound to first, if you werent a d*** you would have received the PM stating how the return of the money that technically I shouldnt have to repay will be paid. Just cause money was sent to me doesnt mean that if someone else steals it I am responsible for it. Hence why Paypal denied your claim for reimbursement. Second Im the one being the morally decent guy in promising to repay all of you anyway, one which I dont have to do, and if you want to keep me from earning money than you will just hurt those chances even further.

 

He is back the guy who stole our money on GP of

 

New product Thermal barrier intake gaskets! Started by Dodge2004srt4, Apr 08 2012 07:46 PM

 

 

Chris, take care of your old business frist - I would not trust him!

I never went away, you just think I should continue a pissing match cause you failed basic reading comprehension in school. Not my problem. If English is not a proficient language for you then Ill be happy to re clarify it in one you can understand.

[Dodge2004srt4]

Bump for on topic sales on what is left. Honestly an surprised some items are still available.

 

Chris.

[Dodge2004srt4]

New items sold tonight Marked as SOLD. Moving on past the drama so I can finish all loose ends on this site. Matt Clawson was repaid his debt 4 days after his loan to me and I also gave him a discount for his kindness and Greg Scott loaned me $75 in July which I repaid when he bought the Cobalt Wideband o2 gauge last week which has already been received. He gave me no time limit to repay him and I hadnt argued or hesitated to make good on it. Same offer was made to anyone else who I owed anything to so if Im not trustworthy I dont know who is on this planet. Some people just cant help but being who they are. My feedback shows and proves the kind of person I am, regardless of one the many speak for my character.

 

Bump,

Chris.

[Skullzaflare]

can you strike me a deal on the steering box assembly and such for a local? lol

[Dodge2004srt4]

can you strike me a deal on the steering box assembly and such for a local? lol

What do you need exactly and what would you offer me? Send me an email, Im having trouble accessing all my PM's so right now I cant get addresses or parts pulled since I replied on that. Email me at dodge2004srt4@hotmail.com and leave me your phone number. I sprained my left hand so you may have to pull it yourself.

 

Chris.

[86silverstarion]

wish you were closer id probably scoop up the whole car

[conquestador89]

how much for hood shipped to San Diego,ca 92139??

[Skullzaflare]

Shot you an email boss

[Dodge2004srt4]

how much for hood shipped to San Diego,ca 92139??

You have to buy the whole car to get the hood right now. If I take off the hood, everything will get wet, its not in a garage being parted, and the neighbors will be pissed. Sorry bud. When the time comes to finish removing stuff in a quick effort to remove the car, then it will be available so if you can wait then Ill have it in the near future. Ill PM you so I have something to remind me.

 

 

For all that are reading this please stop asking for parts that arent listed, PM me only if you feel you want to ask me for something that isnt listed! Think of this thread as a store, see it, buy it. However you may ask me for needs through PM's

[Skullzaflare]

Head and Steering box/idler Sold to me

[Draggin_Quest]

Any interest in shipping the exhaust to 83686?

[Dodge2004srt4]

Any interest in shipping the exhaust to 83686?

I would have seen this quicker had you PM'd me like I asked but if you are willing to pay for the shipping which will not be cheap than yes Ill ship it. It will probably cost atleast $100 in shipping just based on what I paid to ship some wheels out that way, they were 100 pounds and cost $137 to ship the pair. Estimating the weight and size of the pipes I think you would be looking anywhere from $75-$100+ to ship. PM me if you are still interested in getting a quote somehow, or another best guess.

 

Chris.

[Young Star *87*]

Do you have any pics of the tail lights? I'm in desperate need of a pair.