starzky Posted January 3, 2013 Report Share Posted January 3, 2013 Brian, Are you going to sell your cars too? I'm from Luzon near Clark, Angeles City,Did you ever think of shipping your best one SQ car to the Philippines? I'm thinking about it...Dude if you have this type of car over there it will be a definite SQ.anyway you still need a car to get around there and fixing them up is much fun and easier. Wish you the best!!! Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 3, 2013 Author Report Share Posted January 3, 2013 Brian, Are you going to sell your cars too? I'm from Luzon near Clark, Angeles City,Did you ever think of shipping your best one SQ car to the Philippines? I'm thinking about it...Dude if you have this type of car over there it will be a definite SQ.anyway you still need a car to get around there and fixing them up is much fun and easier. Wish you the best!!! Well as of now I'm not going to sell the cars. I have a good friend who is going to let me keep them at his place until I get everything situated. I did think of shipping one over there but I don't think I'm going to have that kind of money. Brazilboy shipped his Quest back from Hawaii and from what I remember that cost $5000.00. Hawaii is about half way to the Philippines and even though it probably won't be twice the cost I couldn't even afford $5000.00 right now. I have several motorcycles and I'm planning to get them over there first. Angeles City you say..... I was already warned by my wife that I am not allowed to go there Without actually having been there I can honestly say without a doubt I would get in way too much trouble and probably wouldn't want to leave. For those of you who don't understand what I'm talking about youtube it Are you there now or living in the states? Quote Link to comment Share on other sites More sharing options...
Ofromda860 Posted January 9, 2013 Report Share Posted January 9, 2013 For those of you who don't understand what I'm talking about youtube it Oh I did!!! Quote Link to comment Share on other sites More sharing options...
flatty86 Posted January 15, 2013 Report Share Posted January 15, 2013 do you still have the stock radio and the part around it? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 15, 2013 Author Report Share Posted January 15, 2013 (edited) do you still have the stock radio and the part around it? I do believe I have a stock radio somewhere and funny you would ask about the radio panel, I have two BRAND NEW radio panels in the bag : http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/NewRadioPanel1a_zpseab0aa94.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/NewRadioPanel1b_zps29251cac.jpg I also have 2 used radio panels : http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/UsedRadiopanel1a_zps2065b28a.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/UsedRadioPanel1b_zpsedadaae4.jpg AND http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/UsedRadiopanel1a_zps2065b28a.jpg I'd like to get $30.00 for the new panels and $10.00 for the used panels. I'll have to find the radio before I go giving a price. Both NOS Radio Bezels have been sold. I still have the two used bezels with one possibly sold. Still have both radios. Edited January 18, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
dpstarion88 Posted January 15, 2013 Report Share Posted January 15, 2013 I'll take one of the New radio panels. Thanks, Dave Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted January 15, 2013 Report Share Posted January 15, 2013 send a paypal just now for radio panel... Quote Link to comment Share on other sites More sharing options...
Heatmiser Posted January 15, 2013 Report Share Posted January 15, 2013 (edited) I'll take the other new panel and the other used radio panel please... Edited January 15, 2013 by Heatmiser Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 15, 2013 Author Report Share Posted January 15, 2013 (edited) Ok, I'm going to need to say this here because its causing me issues with selling these parts so please follow this request. 1. When you see something you want PLEASE post here so I can see it in the order of who wanted it first. 2. Do NOT send payment until contact you and let you know the part /parts are still available. What I have now is one member who originally asked for this part and hasn't told me if he wanted a new or used radio panel. Then another member sent me a PM and wants a new radio panel and three more here who want one. Problem now is the third guy in line has already paid. This leaves me with a tough decision and this is really stressin me out because these parts are pretty rare since they are no longer available from Mitsu. Most of all I want to be fair to everyone so now what do I do? 1. Flatty86 (new or used ?) 2. dpstarion88 - NEW 3. BuGG - NEW (sent me a PM below) Sent Today, 01:21 AMJust saw your parts post and add the new radio bezel to the oil line order if still available. 4. Johnny Wadd - already paid for new panel Edited January 15, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
dpstarion88 Posted January 15, 2013 Report Share Posted January 15, 2013 I would do first come first serve, or first interest first serve. People shouldn't just pay for things before they get confirmation from the seller that parts are actually available. Just my $.02 Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 15, 2013 Author Report Share Posted January 15, 2013 do you still have the stock radio and the part around it? Please let me know as soon as you can if you are interested in the new or used radio panel. I'm giving you first choice since you replied first. I also found 2 factory radios and I'll post them up shortly. I don't remember what cars they came out of but I'm pretty sure the one is from my 89 Starion. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 (edited) Here are the two radios I found.http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04363_zps7505e4a5.jpgThis one I believe is out of my 89 Starion. Don't think I ever used the tape player so I can't say if it works or not. Just assume it doesn't and if it does then you'll be happy http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04371_zpsd95a3b5a.jpgThis one may have been from a parts car, if you look close you can see the left pop out balance adjuster does not stay in. Maybe its an easy fix I don't know. Same goes with the tape player, I can't say if it works or not. Just assume it doesn't and if it does then you'll be happy again http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04367_zps71591c77.jpg $25.00 each plus Shipping and PP or $50.00 for both and I'll ship em free. Edited January 16, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 (edited) ACCEL 300+ 8.8mm Ferro-Spiral Race Wires (Part # 7032) **** THIS IS A HALF SET ****Price New on Summit : http://www.summitrac.../parts/acc-7032 - $99.95 new for a full set. http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04410_zpsf2b624e9.jpg Here are the length of the wires in this kit : 1.) 45" 2.) 37" 3 & 4.) 26" 5.) 18" PLEASE MEASURE YOUR SETUP AND BE SURE THESE WILL FIT THE WAY YOU WANT THEM ROUTED!!!!! $40.00 plus shipping and PP IF YOU WANT THESE WIRES POST UP HERE FIRST!!!! IF YOU SEND ME PM's, EMAIL ME or CALL ME ON THE PHONE YOU WILL NOT BE IN LINE TO GET THEM. AFTER YOU TELL ME YOU WANT THEM I WILL GIVE YOU A REASONABLE TIME TO PAY (Ex. You tell me that you get paid Friday and you'll send me the money then. If you don't pay Friday I go to the next person period.) Sorry to be like this but I have a ton of parts to move and I really need this stuff gone asap. Edited January 16, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
dpstarion88 Posted January 16, 2013 Report Share Posted January 16, 2013 Hey there Brian, do you have a Steering Coupler Socket? If so how much? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 Hey there Brian, do you have a Steering Coupler Socket? If so how much? I believe you are referring to the infamous "steering knuckle" which it's easier to scrap the car than change it out. I'm sorry I do not have one. Quote Link to comment Share on other sites More sharing options...
dpstarion88 Posted January 16, 2013 Report Share Posted January 16, 2013 Haha, no problem at all. Thank you anyways. Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted January 16, 2013 Report Share Posted January 16, 2013 Ok, I'm going to need to say this here because its causing me issues with selling these parts so please follow this request. 1. When you see something you want PLEASE post here so I can see it in the order of who wanted it first. 2. Do NOT send payment until contact you and let you know the part /parts are still available. What I have now is one member who originally asked for this part and hasn't told me if he wanted a new or used radio panel. Then another member sent me a PM and wants a new radio panel and three more here who want one. Problem now is the third guy in line has already paid. This leaves me with a tough decision and this is really stressin me out because these parts are pretty rare since they are no longer available from Mitsu. Most of all I want to be fair to everyone so now what do I do? 1. Flatty86 (new or used ?) 2. dpstarion88 - NEW 3. BuGG - NEW (sent me a PM below) 4. Johnny Wadd - already paid for new panel No worries if someone beat me to it. Standing by Quote Link to comment Share on other sites More sharing options...
StarionJA83 Posted January 16, 2013 Report Share Posted January 16, 2013 Hey mate Do you have stereo bezel? The double with a single pocket? And do you have the window trims(outside) in good condition? Pm me Please Brock. Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 (edited) I have 6 GMB 220-0088 U-Joints for sale. These are the good solid ones. http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/Picture015.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04450_zps5de7f329.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/Picture012.jpg $15.00 each plus shipping and PP IF YOU WANT THESE PARTS POST UP HERE FIRST!!!! IF YOU SEND ME PM's, EMAIL ME or CALL ME ON THE PHONE YOU WILL NOT BE IN LINE TO GET THEM. AFTER YOU TELL ME YOU WANT THEM I WILL GIVE YOU A REASONABLE TIME TO PAY (Ex. You tell me that you get paid Friday and you'll send me the money. If you don't pay Friday I go to the next person in line.) Sorry to be like this but I have a ton of parts to move and I really need this stuff gone asap. SOLD Edited January 18, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 I have a box of good used fuel pressure regulators for sale http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04423_zps464837ea.jpg $40.00 Each Shipped Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 (edited) Box Of ISC Motors For Sale http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04428_zpsca0548c5.jpg Both early and late style, let me know what you need. $40.00 each OBO..... Edited January 27, 2013 by brianpaul98 1 Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 16, 2013 Author Report Share Posted January 16, 2013 (edited) Oil Catch Can http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04396_zpsd7918edd.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04397_zpsf03deef2.jpg http://i917.photobucket.com/albums/ad20/brianarnone2009/SQC%20Parts%20Blowout/DSC04393_zps5fd48b78.jpg $20.00 SOLD Edited January 18, 2013 by brianpaul98 Quote Link to comment Share on other sites More sharing options...
randy Posted January 17, 2013 Report Share Posted January 17, 2013 I'll take the catch can. Quote Link to comment Share on other sites More sharing options...
BuGG Posted January 17, 2013 Report Share Posted January 17, 2013 Can you add 2 of those 220-0088 u-joints to my order? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted January 17, 2013 Author Report Share Posted January 17, 2013 I'll take the catch can. Sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.