myquest86 Posted July 13, 2012 Report Share Posted July 13, 2012 So yesterday my left headlight did not pop up when I turned my lights on. The headlight still comes on, but did not raise.....never done this before and passanger side still works properly. Any suggestions would be greatly appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
tux Posted July 13, 2012 Report Share Posted July 13, 2012 (edited) check the relay. hit the button and have someone else listen for it to click Edited July 13, 2012 by tux 1 Quote Link to comment Share on other sites More sharing options...
joey_crandall Posted July 13, 2012 Report Share Posted July 13, 2012 probably the motor, if you need to look under teh airdam and theres a knob o mnteh motor you can turn and manually pop them up, look around on teh forums im sure you can find one, Quote Link to comment Share on other sites More sharing options...
TrustConquest Posted July 13, 2012 Report Share Posted July 13, 2012 (edited) check the relay. hit the button and have someone else listen for it to clickAgreed. Jump to page 182. (1986)http://www.starquestgarage.com/manuals/service/conquest/1986/86_conquest_service_manual_-_group_08_-_electrical.pdf Edited July 13, 2012 by TrustConquest Quote Link to comment Share on other sites More sharing options...
myquest86 Posted July 13, 2012 Author Report Share Posted July 13, 2012 If it was a relay wouldn't it affect both headlight though?? or do they each have their own? Quote Link to comment Share on other sites More sharing options...
TrustConquest Posted July 13, 2012 Report Share Posted July 13, 2012 (edited) If it was a relay wouldn't it affect both headlight though?? or do they each have their own?They each have their own. Look at the link I provided you on page 182. Relay #2 & #3 Edited July 13, 2012 by TrustConquest Quote Link to comment Share on other sites More sharing options...
jabbott126 Posted July 14, 2012 Report Share Posted July 14, 2012 When you hit the button if you hear noise but no movement its most likely the motor, but if all you hear is a slight click then its probably your relay. IF you want a quick way to check it then run a jumper wire from both inlets that the relay plugs into, just be careful because if you have a short causing your problem then it could heat up the jumper wire when power is supplied (gloves recommended) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.