Jump to content

Complete Manual Seatbelt Setup, EVO-II Momo Wheel + Hub, Clean Black Interior, and much more!


Foreverzero
 Share

Recommended Posts

Well I'm pulling the last few things off the car before I send it to the crusher. I've only been pulling the things that I think have a high likelihood of selling but if theres a part you are looking for that you don't see listed here, please feel free to PM and I might be able to accomodate you. All these parts came off my 86 daily driver. All interior bits are black and are in good shape. Any minor defects, I tried to take detailed pics of. All prices are SHIPPED Except for the manual seat belt setup as I'll need to get a quote from FedEx as to how much it will be to ship but know that I am quite willing to ship if need be.

 

All pics can be found on my photobucket here: http://s1181.photobu...x430/wp0170171/

  • Complete 1986 Manual Seatbelt Setup (Seatbelts and Spools, Buckles, Door Panels, A-pillars, Very Clean Black Carpet, Console, Coin Tray, etc. *** $200 SOLD!
  • OEM Leather Wrapped Mitsubishi Lancer EVO II Momo Steering Wheel PLUS Boss Bolt-On Hub $150 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0482.jpg?t=1332821598
  • Greddy 1.5 Bar Boost Gauge $50! http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0489.jpg?t=1332821738
  • Black mid-90s HKS Turbo Timer WITH Plug and Play Harness $35 SOLD!
  • Black Face HVAC Control Panel w/ trim $25 SOLD!
  • OEM power mirrors (Rio Red) $45 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0479.jpg?t=1332821531
  • Pair of Turbo Door Handles $75 SOLD!
  • Cross-Drilled / Slotted Rotors for Front and Rear (Maybe 1k miles on them) $80 SOLD!
  • Clean 1-Piece Air Dam $120 SOLD!
  • 25mm Billet Aluminum Spacers (Hub+Wheel centric for Starquests!) (Maybe 1k miles on them) $30 http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0484.jpg?t=1332821618

*** The only thing you'll have to source is a headliner as the first owner of the car installed an aftermarket sunroof which plants a big hole right in the center of the headliner :(

 

 

 

 

 

Work keeps me pretty busy so I haven't pulled the fenders or hatch or other misc oem parts that I'm not sure will generate much interest with all the parts cars on here, but again if you need something please don't hesitate to ask.

 

Thanks,

Cameron

417-five nine 7- 2 six 9 seven

Edited by Foreverzero
Link to comment
Share on other sites

A couple notes I feel obligated to put up. The paint on the air dam was damaged in the engine bay fire but the integrity of the Air Dam intself is just fine. Probably doesn't concern most on here as they'll have to paint it to match their car anyway but I just wanted that known.

 

http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0508.jpg?t=1332822110

 

 

A couple of the mounting holes for the center console became brittle and partially cracked so the simple solution I found was to just use washers over the factory mounting screws. Pics will probably explain it better than I can so here's what I mean.

 

http://i1181.photobucket.com/albums/x430/wp0170171/IMAG0495.jpg?t=1332821837

 

Again, more pics can be found on my photobucket here: http://s1181.photobucket.com/albums/x430/wp0170171/

Edited by Foreverzero
Link to comment
Share on other sites

Thanx for the pics,,,I'm still interested in the airdam and seat belt stuff ,minus door panels

 

You're first in line for both the air dam and the belt setup and I'd definitely like to save a bit on shipping by combining. I texted the approximate shipping cost to you. Let me know if you're still interested

 

texted you about the steering wheel.

 

You're first in line on the wheel. I got your text and just sent you one back.

 

Intrested in the spacers.

 

PM'ed you back. Thanks

 

Pmd you on the turbo door handles

 

Pm'ed you back. Thanks

 

DIBs on the HVAC unit I need both front wiper arms, do you have them and are they in good shape?

 

You're first in line on the HVAC controls. Yep I still have the wiper arms and they're both in very good shape. I uploaded a pic of them to my photobucket for you so you can see for yourself. If you want the arms and hvac controls I'd do it for 45 shipped. I'll even throw in the 1 piece Anco Contour blades on them. Those were 15 bucks a piece : /

 

I'll take the hks turbo timer! Prices shipped to 46225 and pics if ur able to

 

You're first in line for the timer/harness. The price is the same as listed above to 46225. Let me know if you're still interested and I'll get the paypal info out to you.

 

pm ed you on rotors thanx charlie

 

PM'ed you back. Thanks

 

 

To the others interested (Red Baron, 19red88quest, Dshaff36), you're all next in line on the parts you specified. If for any reason the buyers who posted interest first fall through then I'll let you know immediately.

Edited by Foreverzero
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...