PDodson Posted April 9, 2011 Report Share Posted April 9, 2011 i need to know the size of a braided oil feed line fitting that screws into the top side of the turbo Link to comment Share on other sites More sharing options...
jolyrgr Posted April 9, 2011 Report Share Posted April 9, 2011 -3 or -4 is the typical ones used on the mitsu turbos. Link to comment Share on other sites More sharing options...
89PalermoSHP Posted April 9, 2011 Report Share Posted April 9, 2011 Clarify if you mean the male side that goes into the turbo or the female side(I guess depending on how the line is set up) on the line itself. Link to comment Share on other sites More sharing options...
PDodson Posted April 10, 2011 Author Report Share Posted April 10, 2011 part that is circled....you see I had a oil feed line that screwed into the stock turbo but when I got the newer turbo i had to get something else....but now I need to get a oil restrictor and need to know what size the female end that screws on top ishttp://i43.photobucket.com/albums/e394/XLR8N/photo23-1.jpg Link to comment Share on other sites More sharing options...
psu_Crash Posted April 10, 2011 Report Share Posted April 10, 2011 I believe it's 4-an Link to comment Share on other sites More sharing options...
89PalermoSHP Posted April 10, 2011 Report Share Posted April 10, 2011 I would guess that the oil line itself is a female -4AN(7/16-20) plugged into an adapter. Get a closer pic of the turbo itself. Link to comment Share on other sites More sharing options...
Recommended Posts