stesir Posted April 5, 2015 Report Share Posted April 5, 2015 Hello: I need to replace the center brake hose/line back from the brake master cylinder to the rear of the car. The car had been sitting a long time and now is leaking.(at the rear) Good thing wasn't driving. What is that line called and how to do it and where to get it?Thanks in advance. The car alreay has new brakes, hoses at each wheel.. Link to comment Share on other sites More sharing options...
Turbo Cary Posted April 6, 2015 Report Share Posted April 6, 2015 You have to either find a good used line in decent condition or make your own. Making your own isnt hard but flaring can be a pain in the butt if your not experienced with it. Link to comment Share on other sites More sharing options...
kev Posted April 6, 2015 Report Share Posted April 6, 2015 Not sure how long u can go without the car , but there is another option. You can remove the line and sent it to inline tube or classic tube and they will make you an exact copy of it. I sent mine to inline tube and had a new one formed out of stainless. It takes a couple of weeks. You can cut yours in half by hack saw in a diagonal cut to lessen the shipping. I tried my hardest to get them to use my lines as templates to stock or at least expedite making new ones for the community but they couldn't guarantee figment because they didn't remove/install them Kev Link to comment Share on other sites More sharing options...
stesir Posted April 12, 2015 Author Report Share Posted April 12, 2015 Thanks guys, was able to use good off of donor car, that actually has new rear things on it...NOw it's emergency brake cables.... have 2 new and 1 brand new Link to comment Share on other sites More sharing options...
Recommended Posts