so im wonder what cam would be best for the setup i have..   New non jet valve head HD springs over sized SS valves 14b turbo TD05h Turbine Weisco 8-1 forged pistons .030 1g maf 2.5 inch dp and exhaust everything else engine wise is new stock fuel system is in good working order I have a wide band and aftermarket boost gauge already   im thinking that that 274 would be fine for what i have but your guys experience would be nice.. also anything i have left out in my rebuild that i may need

lookin for a nice yellow widebody. motor not important let me know what you got thanks tim

If you try to order a new steering gear from RockAuto, or most any of the other suppliers I have found, they use a reman from A1 Cardone with part number 27-8450. DO NOT WASTE YOUR TIME OR MONEY! This part number WILL NOT work for StarQuests. The main shaft (splined part that connects to the steering column) is too short to connect. Rockauto called Cardone, and they verified that the original Mitsu part numbers all referenced their 27-8450 part, and the main shaft spec on that part is 1 1/16i

clutch does slip under high RPM boost pulls. Still drives fine. i used 5 big bottles to draim and it is still the same