Here's pictures of my brake light/turn signal mod. I done this mod so I could have amber-colored turn signals when using my clear taillights. This mod will work with regular taillights, but the turn signals will be red.   Picture with the park lights turned on:     Picture with the brake pedal pressed down:     Picture of the hazard lights turned on:     Picture of the brake pedal pressed down & the hazard lights turned on:     Picture of the driver-side taillight with the brake

I have not done any business with them but I thought that anyone looking for wide angle led bulbs for clear taillights might be interested.  They have good prices, and they claim that their bulbs are super bright (hence the web address), and it looks like they carry almost all types of automotive bulb styles.   Derek   Forgot a link www.superbrightleds.com/1157.htm The only red 1157 bulb they have with wide angle viewing has 19 leds, but they also have 12 and 30 led bulbs that are only avail

I need some opinions or advice on how hard its going to be to get this driver's side front fender support and the radiator support straight again:   http://www.g-body.org/temp/d_fender_support.jpg   Driver's Side Front Fender Support, notice how its wavy compared to the straight edge of the headlight trim cover.   http://www.g-body.org/temp/radiatorsupport_top_d.jpg   The radiator support is bent and sorta wrinkled.   http://www.g-body.org/temp/radiatorsupport_top_d2.jpg

This is how my 3rd Cylinder plug looked when I pulled it out.  I'm in the process of putting on the new top end.  I've known the head is cracked for a while but it hasn't really felt like it's been running bad.  I don't think there is more than 10K on this plug.  I can't believe it wasn;t a more noticeable miss.   http://www.goldnblack.net/photos/0311sqhd/IMG_2556.JPG