John bought one of my rear hatch spoilers. Very prompt payment and good communication. Would definitely do business with again.   Nick

OK, i went through the forums. i use to get borg-warners for an 87 nissan V6 like recomended years ago by someone on this sight. it was perfect. last set the metal pulled out, staying on the plug. non repairable, molded on plug. complete crap. so i warrantied them and the new ones(new vendor for borg-warner) 4 are 4 inches too short. so unless i run the wires over the valve cover, they're not useable. i returned them. all the Taylor, MSD and Accells that are custom cut, crimp your self on the sh

Believe I paid 160 or 200 for it I want 160,,, but will I get it ? Doubt it Never really used,,,was installed that's it,,, Idled, and maybe taken down the street. Shortly after that I disassembled the motor And never reinstalled a throttle body setup. Your manifold will need ported to fit.   http://i179.photobucket.com/albums/w316/conquest232/83a9b891bf781d833edda3ebb4bec1bc_zps9dabf3f1.jpg http://i179.photobucket.com/albums/w316/conquest232/b28e33ef.jpg http://i179.photobucket.com/albums/w31

OK so i have this code on my 1989 Auto. I'm gettting the 3 blinks. I had another spare stock MAS that i know is good since it used to be on my 1988 manual before i went 1G MAS. I switched it out and erased all the codes by disconnecting the battery. Took it for a drive but the code came back. What else could be wrong?   Here is what the book tells me to look for: AFS. checked and replaced wire harness and connector. Does this mean the connector that connects to the AFS? I should check i