Jump to content

    Spiffing up distributor - Beck Arnley or Airtex / Wells for cap and rotor?

    HeroJr
    By HeroJr,
    Hey all!   I am back to working on my Conquest and am trying to wrap up some issues from late last Fall. I have a new cam and rocker arms in the car and I went back to the stock MAF. Things run so much better now! However, after all those changes, the car now seems to randomly die. It just shuts itself totally off. It is an electrical problem, because you can go back and try to turn the key and nothing happens. Unhook and rehook the battery and you can fire it up again. After about 20 minutes, i

    Fog lights

     mechengrkj
    By mechengrkj,
    My fog lights aren't working. I tested the voltage at the foglight connector and its not getting anything. Tested the relay and its working. Tested the diodes below the gauge cluster and I know one of them is working properly, not sure about the other one. Any suggestions on what to test? I have been looking at the electrical diagrams in the service manual and it seems like the diodes are the only things that could be keeping them from lighting. If one of the diodes is bad, how can I replace it?

    OK...So Who Has Clicked the Brides Ad at the Bottom?

    NikoFab
    By NikoFab,
    I've seen Russian, Chinese, and European so far. Any that I've missed? LOL   Good job ryddler! Keeping the site going

    Street bike or cheap reliable beater

    white quest ky
    By white quest ky,
    Well the conquest is getting a ton of attention this summer and I need a cheap beater or street bike if anyone has anything for 1300 locally let me know

Portal by DevFuse · Based on IP.Board Portal by IPS
×
×
  • Create New...