i was woundering if any HKS dohc heads are left?....i was thinking of calling HKS USA to see if they still can make them.....

Today I finally completed something I started last fall...  A TBI mounted fuel pressure guage.  I was having problems getting the metric adaptor to seal good enough to the stock threads.  I ended up taking it to a machine shop and they retapped the threads to 1/4" NPT.   It only took the guy 2 mins and was pretty easy.  You could probably do this with your own taps if you have them.   The guage is ~$20 from summit http://store.summitracing.com/partdetail.a...rt=SUM%2D800199 You'll also need a

I was filling my car with coolant and now it started to leak from the adapter plate ! In near the rear of the car where the heater hose attaches. Did I put the plate on correctly? I put the adapter up against the head and the gasket then the manifold. Did I need to put another gasket between the head and adapter?   Jonathan

Currently the member list can be scanned by any spambot.  These bots scan pages for email addresses.  I'm currently moving my web page and email accounts to a new server and found some mailboxes had email in them even though they were not actively being used.  The only way these were found was by spam bots reading the links on the pages.  My site isn't even listed with search engines but these address were still found.     I have a number of email addresses including one that I only use on my o