Ive got a rebuilt 86 alternator and the corresponding harness connection     which looks like this   l-   in comparison to the 87 and later style   which looks like this   (| |)   The stock 89 wiring is white/yellow stripe and white/green stripe   I need to connect the 86 harness (white/brown & a blue wire) but don't know which wires go where, I only have the pdf with 88 electrical and can't firgure this out without an 86 wiring diagram or some - please  - help  Its my only alte

what can i do to fix the tilt steering? it keeps on popping out everytime i lock it. thanks

FOR A NEWBIE WITH LITTLE POSTS I PURCHASED THE FORGE PISTONS FROM HIM. GOOD COMMUNICATION AND POSTED THEM AS PROMISED. WOULD RECOMMEND ANYONE TO DO BUSINESSWITH HIM I CERTAINLY WILL BE! THANKS DENNIS.

while the injectors are in the car and hooked up . write down which wire goes where on the injector . . then take out the injectors . take the clip off , break the clip open so the plastic is not on the metal tabs . few ways it can be done .   probably the best way . solder each metal tab to the injector tabs then fill the injector with epoxy or some type of sealent .   the cheaper way to go is to slide each metal tab on the injector tabs and fill with epoxy . let dry   after thats done pu